Skins Porsche 911 GT3 R Berzerkdesign 1.2

[AyrtonForever]

AyrtonForever submitted a new resource:

Porsche GT3 R Berzerkdesign - inspired from berzerkdesign original livery

original livery is for GTE Porsche model wich still doesn't have new shaders, so i adapted it to the GT3. some spo nsors missing (perhaps fantasy logos? spark, mis....)
View attachment 291873 View attachment 291875 View attachment 291876 View attachment 291877

Read more about this resource...

 

[AyrtonForever]

AyrtonForever updated Porsche 911 GT3 R Berzerkdesign with a new update entry:

added windshield blancpain banner

added banner on windshield

Read the rest of this update entry...

 

[Reiche]

"Spark automotive logo" and "mis motorsports logo" Google search should give you the logos mentioned;

original car is the 2019 911 GT3 R, not the RSR (GTE) by the way

 

[AyrtonForever]

thank you for your precious help, I'll search for those logos. do you know the others missing?
I was meaning GTE 3d car model in rf2

 

[Reiche]

"Dixcel logo" for Dixcel advanced brake technology
Blancpain logo at the floor
Blancpain GT Asia logo on the fenders
Berzerkdesign logo on A pillars

http://absoluteracing.net/2019/01/0...t-world-challenge-asia-presence-with-porsche/

Racing optics for the windshield tearoffs if that's paintable

number font should be Graystroke, again if paintable

 

[AyrtonForever]

AyrtonForever updated Porsche 911 GT3 R Berzerkdesign with a new update entry:

version 1.0

added missing logos, thanks to Reiche

Read the rest of this update entry...

 

[AyrtonForever]

AyrtonForever updated Porsche 911 GT3 R Berzerkdesign with a new update entry:

added number plates and 912 car

added numer plates and car #912

Read the rest of this update entry...

 

[AyrtonForever]

AyrtonForever updated Porsche 911 GT3 R Berzerkdesign with a new update entry:

tweaked grey

i have slightly changed the grey of the body

Read the rest of this update entry...

 

[AyrtonForever]

"Dixcel logo" for Dixcel advanced brake technology
Blancpain logo at the floor
Blancpain GT Asia logo on the fenders
Berzerkdesign logo on A pillars

http://absoluteracing.net/2019/01/0...t-world-challenge-asia-presence-with-porsche/

Racing optics for the windshield tearoffs if that's paintable

number font should be Graystroke, again if paintable

what you think now, it's ok?

 

[Reiche]

Absolutely, it turned out nicely
In my opinion, it's always harder to adapt a design to a different car than doing a true 1:1 replica, but it's really a good result. (Like it's the case here with the new-gen GT3 car as original car and the "old" gen GT3 used in game)

I don't want to be over-critically, but I noticed one more thing: some of your decals look quite warped (especially SRO both at front and back, GT3 on back of the car). You could try to manipulate your logos so they look more "in shape".

I'm just judging based on the screenshots as I don't own the Challengers DLC yet. By the way, did you straighten the Porsche writing on the bonnet? I was under the impression it was slightly warped in earlier screenshots as well.

 

[AyrtonForever]

no problem

Absolutely, it turned out nicely
In my opinion, it's always harder to adapt a design to a different car than doing a true 1:1 replica, but it's really a good result. (Like it's the case here with the new-gen GT3 car as original car and the "old" gen GT3 used in game)

I don't want to be over-critically, but I noticed one more thing: some of your decals look quite warped (especially SRO both at front and back, GT3 on back of the car). You could try to manipulate your logos so they look more "in shape".

I'm just judging based on the screenshots as I don't own the Challengers DLC yet. By the way, did you straighten the Porsche writing on the bonnet? I was under the impression it was slightly warped in earlier screenshots as well.

no problem, critics are ever helpful
the decals aren't warped but only rotated, they appears warped for the rounded surface. in these cases i would have to warp them just to compensate for the effect, but i have not done it yet. the Porsche writing is untouched. other problems i had with numbers on windshield and windows, cause the position light placed in a different way and a deformation in the windows, where i had to put number slightly higherv than the real car

 

[AyrtonForever]

the only text warped is the blancpain banner on the windshield

 

[Reiche]

Okay, yeah, might have been because of a bad angle so it only appeared warped.
Compensation is a good term here. Sometimes certain geometric shapes look distorted on the car due to the UV mapping of the model, so compensation might be useful to get rid of that effect. But this are really details only very few people will notice, so no worries

I'm happy you understood my criticism just as it was intended - in order to help/improve