Porsche GT3 R (S397 variant) - Bathurst (ISI/S397 layout)

Getting 2:09 race fuel / soft tyres - first setup I'm actually pleased with, very balanced over the mountain / overall vs stock whereby the back end wants to meet the front!

You can probably lower the downforce for those brave enough; I found it gets loose at the end of Conrod Straight as it kinks right before the chase with anything less unless you lift slightly, but who lifts haha.

Would love feedback, improvements
 

Attachments

  • Porschebathgt3.svm
    4.4 KB · Views: 1,030
Last edited:
I had a pr. at 2:10.289

then tried your setup, and after a few laps I had 2:11.....
but your setup was quite stable, though loose in some turns.

Then I compared your setup with mine, and changed yours to
  1. rear aero from P10 to P15
  2. rear toe in from 0.234 to 0.586 deg
I then did a few laps and did a 2:08.601


Thx for sharing your setup
 
Awesome setup thepharcyde, used this setup at Road America and was a rocket straight out of the bag.
I fiddled with camber on the rightside as it doesn't work hard on this track
Was doing 2:06 with my setup, this setup gave me low 5's and mid to high 4's
Really nice when people post their svm files:D
 
Awesome setup thepharcyde, used this setup at Road America and was a rocket straight out of the bag.
I fiddled with camber on the rightside as it doesn't work hard on this track
Was doing 2:06 with my setup, this setup gave me low 5's and mid to high 4's
Really nice when people post their svm files:D
You're all welcome, I've not played RF2 for a while as I've been scratching a flight sim itch again.
:)
 

What are you racing on?

  • Racing rig

    Votes: 528 35.2%
  • Motion rig

    Votes: 43 2.9%
  • Pull-out-rig

    Votes: 54 3.6%
  • Wheel stand

    Votes: 191 12.7%
  • My desktop

    Votes: 618 41.2%
  • Something else

    Votes: 66 4.4%
Back
Top