Problemi con electroseed TBB-01
- Thread starter xstorm
- Start date
Not enough information;
TBB_01 appears to be a breakout board for Teensy-LC and Teensy-3.2,
but SimHub supports Arduino, which is not Teensy...
Disconnections are USB? What is attached to the breakout board?
First guess will be that something is drawing too much power.
Second is that Dupont solderless jumper wires make unreliable connections,
which could provoke microcontroller code to get lost.
Last edited:
The card is connected to the PC via USB and when I say it "disconnects" I mean as if I physically unplugged the card for a nanosecond. This problem occurs a lot for example on f1 2020 but is almost absent on Assetto Corsa, Grid 2019. At the moment 22 LEDs and a nextion 4.3 are connected to the card but the problem occurs even if nothing is connected at all. I tried to change the USB cable, the PC out port between 2.0 and 3.0 but nothing has changed. Sometimes these disconnections / reconnections are so "violent" that all the other devices that I have connected to the other usb of the pc are also deactivated.
You have yet to describe what code is running in the presumed Teensy,
given that it was unlikely to have been programmed by SimHub.
That could happen if Teensy code violates some fundamental USB protocol,
provoking Windows to re-enumerate devices.
Most Internet searches for "TBB_01" "node blue" "simhub"
match at electroseed.fr or racingfr.net
or here: https://github.com/TeensyUser/doc/wiki/NodeBlue
Those are more likely places to ask for expertise and experience
about this misbehavior / bug. This is from a Apr 29th 2021 reply at racingfr.net:
"Support is now preferentially done through the chat integrated into Node Blue
(and the store), it allows me to access your projects / orders much more easily."
Last edited:
