Race 07 and MoTeC track map

[Jon Marjanen]

Hi all, new member here.

I'm having a weird issue with MoTeC and Race07. Race07 logs the data fine and I can view it with the MoTeC program, but the track map is all screwed up.

Here's a picture to show you what I mean:

That's supposed to be Oschersleben 07.

Is this a known Race07 issue? I never had this problem with GTR2 or rFactor.

Thanks for any help.

 

[Jon Marjanen]

I forgot to add that MoTeC version is 1.0.3.106.

 

[Krister Larsson]

Right click track map and select "Track Editor"
Then click "Generate Track" be sure to have Track type set to "Closed Circuit" before clicking OK. That should normally fix it.

 

[Jon Marjanen]

Thanks that worked. Though the s/f line is still in the wrong place on the straight but that doesn't matter. Thanks again!

 

[Krister Larsson]

Then you can try to regenerate sectors.

 

[Koray Can]

Do a slow lap driving the center line of the track.
Be sure to click on Tools > Corrected Speed and Distance and choose the Ground Speed channel for corrected speed before re-generating the track.

You may want to save that .mt2 file under the Track Maps folder for future projects on the same track.

 

[Jamie Wilson]

This issue can also occur due to a complication involving how MoTeC interprets the G Force Lat channel at higher sampling rates; 20Hz is pretty much the maximum that it will support.

 

[Jon Marjanen]

Thanks everyone. As far as I know the issue only affected Oschersleben as I tried other tracks and they all generated fine in MoTeC. Weird thing is I then drove again at O and it too generated fine. Issue has gone away it would seem.