Physics Rear Axle?

[Yazhog]

Hello, I'm trying to reproduce this rear suspension, with my knowledge i guessed this is a AXLE type, but when I'm trying to make it work the car will bounce everywhere and the wheels will go in the car.

Here is the. Ini

Another question is, with AXLE type, how do i set my fixation points of my spring and my shock absockerder?

 

[Stereo]

You need more links to make it stable, 2 is not enough. They act like tie rods, ball joint at each end.

Spring and shock are attached using "ATTACH_REL_POS" which multiplies by the track width. So 0.62 and 1.467 (0.734 per side) means they're at 0.455m from the center of the car.

 

[Yazhog]

You need more links to make it stable, 2 is not enough. They act like tie rods, ball joint at each end.

Spring and shock are attached using "ATTACH_REL_POS" which multiplies by the track width. So 0.62 and 1.467 (0.734 per side) means they're at 0.455m from the center of the car.

LINK_COUNT=4
J0_CAR=0.5835,0.02,0.1641 ; car bottom left arm. reference point center of live axle
J0_AXLE=0.7335,0.0,0.0 ; tyre bottom left arm. reference point center of live axle

J1_CAR=-0.5835,0.02,0.1641 ; car bottom right arm. reference point center of live axle
J1_AXLE=-0.7335,0.0, 0.0 ; tyre bottom right arm. reference point center of live axle

J2_CAR=-0.6335,0.27,0 ; car bottom right arm. reference point center of live axle
J2_AXLE=-0.6335,-0.04811,-0.039 ; tyre bottom right arm. reference point center of live axle

J3_CAR=0.6335,0.27,0 ; car bottom right arm. reference point center of live axle
J3_AXLE=0.6335,-0.04811,-0.039 ; tyre bottom right arm. reference point center of live axle

LEAF_SPRING_LAT_K=0


ATTACH_REL_POS=0.75
TORQUE_REACTION=-0.2

Lets admit my shock absorber and my spring arent at the same position, how i could put that in ac ?

 

[Stereo]

Lets admit my shock absorber and my spring arent at the same position, how i could put that in ac ?

You can't do that with AXLE (or with other types of suspension)

 

[Yazhog]

You can't do that with AXLE (or with other types of suspension)

Okey, so let's do like of they were reunited.

For me all the Joints where points of attachement between the suspension and the car.

So since I've got only one, i also put the suspension as a link between them?

Or how I do define the second set of joints?

 

[Yazhog]

Here you have what i does look like in game, nothing like solid, i've no idea how to fix that