I question I had on my mind since some time now, do you guys see if the car in front of you activates its DRS?
For me I never see the animation... but I am pretty certain that it should be animated.
Also in regards to car setup and Roll Center settings. When it says: "Higher Roll Center does this: "
Does that refer to the RC Height from the list below, or to the number which can be selected, i.e. 1A - 7I?
For me I never see the animation... but I am pretty certain that it should be animated.
Also in regards to car setup and Roll Center settings. When it says: "Higher Roll Center does this: "
Does that refer to the RC Height from the list below, or to the number which can be selected, i.e. 1A - 7I?
1-A
Relative RC Height: +22.5mm, Camber change for 10mm bump: -0.20°, Antisquat: 27.0%, Antilift: 12.1%
1-E
Relative RC Height: +49.5mm, Camber change for 10mm bump: -0.30°, Antisquat: 27.0%, Antilift: 12.1%
1-I
Relative RC Height: +74.0mm, Camber change for 10mm bump: -0.39°, Antisquat: 27.0%, Antilift: 12.1%
2-A
Relative RC Height: +5.0mm, Camber change for 10mm bump: -0.17°, Antisquat: 11.1%, Antilift: -18.3%
2-E
Relative RC Height: +32.0mm, Camber change for 10mm bump: -0.27°, Antisquat: 11.1%, Antilift: -18.3%
2-I
Relative RC Height: +58.0mm, Camber change for 10mm bump: -0.37°, Antisquat: 11.1%, Antilift: -18.3%
3-A
Relative RC Height: -10.0mm, Camber change for 10mm bump: -0.15°, Antisquat: 42.8%, Antilift: 42.5%
3-E
Relative RC Height: +17.0mm, Camber change for 10mm bump: -0.25°, Antisquat: 42.4%, Antilift: 42.5%
4-A
Relative RC Height: -28.5mm, Camber change for 10mm bump: -0.12°, Antisquat: 27.0%, Antilift: 12.1%
4-E (STD)
Relative RC Height: /, Camber change for 10mm bump: -0.22°, Antisquat: 27.0%, Antilift: 12.1%
4-I
Relative RC Height: +26.5mm, Camber change for 10mm bump: -0.32°, Antisquat: 27.0%, Antilift: 12.1%
5-E
Relative RC Height: -24.0mm, Camber change for 10mm bump: -0.19°, Antisquat: 11.6%, Antilift: -18.6%
5-I
Relative RC Height: +3.3mm, Camber change for 10mm bump: -0.29°, Antisquat: 11.6%, Antilift: -18.6%
6-A
Relative RC Height: -55.0mm, Camber change for 10mm bump: -0.06°, Antisquat: 42.6%, Antilift: 41.8%
6-E
Relative RC Height: -27.0mm, Camber change for 10mm bump: -0.16°, Antisquat: 42.6%, Antilift: 41.9%
7-E
Relative RC Height: -51.0mm, Camber change for 10mm bump: -0.13°, Antisquat: 27.0%, Antilift: 12.1%
7-I
Relative RC Height: -29.3mm, Camber change for 10mm bump: -0.24°, Antisquat: 27.3%, Antilift: 12.3%