Skins Sauber F1 - RSS Formula Hybrid 2018 v.3

Sven Smits · Apr 1, 2018

Sven Smits submitted a new resource:

Sauber F1 - RSS Formula Hybrid 2018 - Sauber F1 - RSS Formula Hybrid 2018

Sven Smits · Apr 1, 2018

Sven Smits updated Sauber F1 - RSS Formula Hybrid 2018 with a new update entry:

Update!

Added some changes!

asehauDLM · Apr 1, 2018

Here's a little feedback on your skin:

1. Ericsson's T-cam should be black (not yellow); Leclerc has the yellow T-cam.

2. It would be great to have the driver number on the engine cover in the next update.

3. Could you add the "E" logo (Fire Extinguisher) to both sides of the car (behind the driver/below the T-cam)?
You can find this logo in the "2017_Detail_D.dds" file from the car templates.
https://images.motorsport-magazin.com/images/950/q_80/sw_adrivo/se_sutton/0864626.jpg
https://cdn-3.motorsport.com/images...ralian-gp-2018-charles-leclerc-sauber-c37.jpg

4. There's a small high voltage logo directly below the T-cam on both sides (logo can also be found in the 2017_Detail_D.dds file).
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-204/

5. There's a Claro logo on the bottom part of the Rearwing endplate.
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-211/

6. A Leclerc version would be nice to have as well. I know his helmet isn't available for AC yet but @Marco17_ok is working on his F1 2018 helmet pack so you can just use a generic helmet until he releases his pack.

7. There's a small texture bug on the halo when using the cockpit cam, small part of the texture is green.

8. The second logo on the black bottom stripe on the side of the car is from HP, I've found the correct logo version that's been used.
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-204/
https://i.amz.mshcdn.com/zhkXne3RA-DkEhawpG5VzdHJIDc=/http://a.amz.mshcdn.com/wp-content/uploads/2015/10/hewlett_logo_blk.png

9. You forgot the Richard Mille logo on the right side of the chassis.
https://images.motorsport-magazin.com/images/950/q_80/sw_adrivo/se_sutton/0864626.jpg

I hope you find this feedback helpful, your base skin is great, only some small adjustments here and there and it will be perfect!

Sven Smits · Apr 1, 2018

asehauDLM said:
Here's a little feedback on your skin:

1. Ericsson's T-cam should be black (not yellow); Leclerc has the yellow T-cam.

2. It would be great to have the driver number on the engine cover in the next update.

3. Could you add the "E" logo (Fire Extinguisher) to both sides of the car (behind the driver/below the T-cam)?
You can find this logo in the "2017_Detail_D.dds" file from the car templates.
https://images.motorsport-magazin.com/images/950/q_80/sw_adrivo/se_sutton/0864626.jpg
https://cdn-3.motorsport.com/images...ralian-gp-2018-charles-leclerc-sauber-c37.jpg

4. There's a small high voltage logo directly below the T-cam on both sides (logo can also be found in the 2017_Detail_D.dds file).
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-204/

5. There's a Claro logo on the bottom part of the Rearwing endplate.
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-211/

6. A Leclerc version would be nice to have as well. I know his helmet isn't available for AC yet but @Marco17_ok is working on his F1 2018 helmet pack so you can just use a generic helmet until he releases his pack.

7. There's a small texture bug on the halo when using the cockpit cam, small part of the texture is green.
View attachment 244368

8. The second logo on the black bottom stripe on the side of the car is from HP, I've found the correct logo version that's been used.
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-204/
https://i.amz.mshcdn.com/zhkXne3RA-DkEhawpG5VzdHJIDc=/http://a.amz.mshcdn.com/wp-content/uploads/2015/10/hewlett_logo_blk.png

9. You forgot the Richard Mille logo on the right side of the chassis.
https://images.motorsport-magazin.com/images/950/q_80/sw_adrivo/se_sutton/0864626.jpg

I hope you find this feedback helpful, your base skin is great, only some small adjustments here and there and it will be perfect!

Thank you very much for the feedback! I am not at home at the moment but I will work on a new version tomorrow. I only don't know how to make the T-cam another color/ black?

asehauDLM · Apr 1, 2018

Sven Smits said:
Thank you very much for the feedback! I am not at home at the moment but I will work on a new version tomorrow. I only don't know how to make the T-cam another color/ black?

That's easy, just copy the "2017_Detail_D.dds" file from the templates to the car skin folder that needs to have the black t-cam (so the file should be in Ericsson's folder but not in Leclerc's folder).

File included = black T-cam
File not included = yellow T-cam

Sven Smits · Apr 2, 2018

Sven Smits updated Sauber F1 - RSS Formula Hybrid 2018 with a new update entry:

Added Leclerc's car + some minor fixes.

What is changed?

Changed and added some small logo's.

Addes Leclerc's car.

Fix the T-cams.

Read the rest of this update entry...

asehauDLM · Apr 2, 2018

Great update! I noticed that the Halo texture bug (screenshot is in my first post) is still there.
I also noticed that the inner side of the Halo + the wing on the top should be also in white instead of black.
It's a shame that I didn't notice that yesterday while testing... it's so obvious.

https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-211/
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-204/

I think that texture bug happened because you left the "HALO_PLACEMENT" layer in the template activated, you should deactivate it when saving the skin.