Shelby Cobra S1 @ Blackwood

Akis · Jul 15, 2014

I made some minor adjustments that help with the stability issues a bit.
Did a 1.20.200 at Blackwood with this setup (Shelby version 0.25, Blackwood 0.9.8).

Assetto Corsa hotlap - Shelby Cobra S1 at Blackwood by Akis Kevrekidis on RaceDepartment Forums

Paul Thomas · Jul 16, 2014

Awesome Set pure sex !!

Aris Teidis · Jul 16, 2014

I'm going to try it now, thanks!

Akis · Jul 16, 2014

If you want to stabilize the rear end even more, try filling the tank with fuel.

Aris Teidis · Jul 16, 2014

Akis Kevrekidis said:
If you want to stabilize the rear end even more, try filling the tank with fuel.

Yes, it could be! I tried your set up and later I reduced some liters and car become more unstable...
I did 1:27:2xx with default set up with vintage tyres and 1:25:5xx with yours (super)!
This car is absolutely fantastic to drive!!!

Georg Siebert · Jul 17, 2014

@Akis Kevrekidis

Professional looking heel & toe ,)

LazyBug · Jul 19, 2014

May i know which one is faster between Stage 1 vs S/C ?? Or same actually ?? I didnt see any different between them in car's info.
Thanks.

Georg Siebert · Jul 19, 2014

LazyBug said:
May i know which one is faster between Stage 1 vs S/C ?? Or same actually ?? I didnt see any different between them in car's info.
Thanks.

they should be the same, the S1 has five gears, the S/C has four

LazyBug · Jul 19, 2014

Georg Siebert said:
they should be the same, the S1 has five gears, the S/C has four

Ic. So mean my time 1:22.108 driving S/C 0.2 vs Blackwood consider ok ??

Georg Siebert · Jul 19, 2014

LazyBug said:
Ic. So mean my time 1:22.108 driving S/C 0.2 vs Blackwood consider ok ??

I don't know, ask Akis, he's driven this combo more than myself.

Akis · Jul 19, 2014

LazyBug said:
Ic. So mean my time 1:22.108 driving S/C 0.2 vs Blackwood consider ok ??

I think that the 0.2 is more stable compared to the 0.1. I'll try it on Blackwood and tell you. Your lap (by 0.1 standards) is quite fast!

LazyBug · Jul 20, 2014

Akis Kevrekidis said:
I think that the 0.2 is more stable compared to the 0.1. I'll try it on Blackwood and tell you. Your lap (by 0.1 standards) is quite fast!

Yeah i agree its no good to compare 0.2 S/C with 0.1 S1, anyway i know there at least 0.5s can be found because i think i pick the wrong line doing the 1st right turn plus i use almost default setup (gear ratio + brake bias are the things i change most) ... i no good in setup

Also i guess the auto clutch assist make me slower, the gear use to stuck a little bit before finally change to higher one. I really like if i can use a button as clutch so i can up-down shift more naturally

Looking forward to your video

jerry090460 · Jul 20, 2014

Thanks

LazyBug · Jul 20, 2014

Still room to improve but at least manage new PB 1:21.451 (Shelby Cobra S/C 0.2 vs Blackwood 0.9.8) while still 0.7s slower than current WR.

Akis · Jul 21, 2014

First post updated. New setup for Shelby Cobra S1 version 0.25.

I did 1.20.200 at Blackwood. I think that this setup is capable of 1.19.9 or something!

LazyBug · Jul 21, 2014

Akis Kevrekidis said:
First post updated. New setup for Shelby Cobra S1 version 0.25.

I did 1.20.200 at Blackwood. I think that this setup is capable of 1.19.9 or something!

Thats fast ya .. I think i will try at least one more night for this new S/C 0.25 before try the S1 version. I wonder if these 2 version has different in term of lap time.