simucube 2 pro which version

[fudo777]

simucube 2 pro which version should i choose r1 or r2?
please help me

 

[LeeHetherington]

There are R1s with external antenna too. Mine from July 2020 has antenna. I have 100% strength with two SRB wheels.

I guess you could say R0 had internal antenna.

 

[CC]

I just bought a SC2 Yesterday and a SRB Wireless GT3 wheel I did not realise there was 2 versions of the base until @Kayumi
mentioned it last night,
we did check earlier and the one I purchased from Murray Motorsports is the R2 single brick model again I prefer the one brick due to where my single brick is mounted on my rig for my DD2,
regarding the antenna I highly doubt there be much difference in signal quality but lets see should be here next weekend I imagine.

 

[Noahbet]

Got a SC2 Pro r1 with the SRB Wireless GT3 Wheel and got 100% signal strenght. No problem at all.

 

[EsxPaul]

Something to look out for and be careful around is the antenna mounting point on the R2.

There have been a few cases of this part either being loose on delivery or shortly thereafter. The user will then naturally try to tighten it which can result in the antenna wire breaking off inside of the base.

 

[CC]

Something to look out for and be careful around is the antenna mounting point on the R2.

There have been a few cases of this part either being loose on delivery or shortly thereafter. The user will then naturally try to tighten it which can result in the antenna wire breaking off inside of the base.

That sounds not good ill make a note in my mind about it... thx

 

[stigs2cousin]

Barry at Simracinggarage had a R1 for testing and if I rember correctly he didn´t have any wireless problems either.
Maybe you want to check the video just in case.

MFG Carsten

 

[Deleted member 197115]

Something to look out for and be careful around is the antenna mounting point on the R2.

There have been a few cases of this part either being loose on delivery or shortly thereafter. The user will then naturally try to tighten it which can result in the antenna wire breaking off inside of the base.

I think it was both R1 and R2 problem, suspect the antenna is the same, for the record only first batch of R1 came without antenna.
If you experience loose antenna mount, here's the instruction from GD on how to tighten it up.

Simucube 2 documentation - Granite Devices Knowledge Wiki

granitedevices.com