I am in the process of wiring a SLI-F1 that Bodnar markets. I have never attempted wiring like this before. I can wire a light switch, only after taking the old one off and use for a reference. lol. ANy assistance is helpful.
It has 3 connection gangs.
Conn 1 - 12) buttons (straight forward)
Conn 2 - 05) SLI12 Positions Rotary Switches
#10 Rotary Switch 8 (activates Buttons 13-24)
a. How specifically should I wire the rotary switch along with buttons #13-24?
Conn 3 - Input 25 & 26 Rotary Encoder ( Left Thumb Dial)
Input 27 & 28 Rotary Encoder (Right Thumb Dial)
Input 29 & 30 Rotary Encoder CTS288V w/push botton.
#09 & #10 - Button 31 and 32 are empty.
a. Can I use for the push botton function of CTS288v in one of these empty push button wires?
It has 3 connection gangs.
Conn 1 - 12) buttons (straight forward)
Conn 2 - 05) SLI12 Positions Rotary Switches
#10 Rotary Switch 8 (activates Buttons 13-24)
a. How specifically should I wire the rotary switch along with buttons #13-24?
Conn 3 - Input 25 & 26 Rotary Encoder ( Left Thumb Dial)
Input 27 & 28 Rotary Encoder (Right Thumb Dial)
Input 29 & 30 Rotary Encoder CTS288V w/push botton.
#09 & #10 - Button 31 and 32 are empty.
a. Can I use for the push botton function of CTS288v in one of these empty push button wires?
![Luca [OT]](/data/avatars/s/3235/3235113.jpg?1697196734){kind=avatar}