T3PA accelerator pedal problem

[kamackeris]

Hi guys.

When I first start using the t3pa pedals they are fine and I can get 100% pressure but after about an hour use I seem to be only able to achieve around 92% pressure. I have to press really hard to get 100% which when I achieve this it seems to alleviate the problem for a while but then it will come back. Any ideas what I can do to remedy this problem?

 

[Rami]

Hi guys.

When I first start using the t3pa pedals they are fine and I can get 100% pressure but after about an hour use I seem to be only able to achieve around 92% pressure. I have to press really hard to get 100% which when I achieve this it seems to alleviate the problem for a while but then it will come back. Any ideas what I can do to remedy this problem?

Try to reinstall TM software. I had something similar a while ago. Are you on win10?

 

[kamackeris]

Try to reinstall TM software. I had something similar a while ago. Are you on win10?

I think it was a hardware problem as I have bought replacement pedals the same ones and they are fine ... The problem would still be there if it was software related