Forwards and backwards by any chance?example
<Parameter name="axisScale" type="vector3" x="0.038" y="0.12" z="0.0105" />
x="0.038= mow much you move side to side as you turn
y="0.12= how much you move up and down over a bump
z="0.0105= cant remember of hand lol
I'll leave it to youyeah that's dead simple ,
y = hight 1.0 = 1 meter,.1 = 10 cm, but if the fov has been changed the distance will also,
x is side to side, + or -
z works on a center line aswell, so if you was 0.0800 and wanted to move back 150 mm you would have to consider the zero line and work backwards.
so 0.0800 - .150 would = (minus) - 0.0700
I can show you.
its much easier than people make out.
take 5 min no longer to add a camera into a pack and convert them back
good
Great work, but might soften the changes and the cockpit away a little more the pilot's vision? Thank you.
Hi I want to ask you can in your fashion 2.4 Edit rearview camera, which would work in repeat mode, as shown in the photo View attachment 43586
As a feedback on 2.4 the HUD isn't working right on the 50/50 cockpit/t-cam camera (the higher one, i don't know what to call it) , i don't get revs/gear/kers.