Thrustmaster Ferrari F1 Wheel component replacement.

[Mike Swannick]

Hi. I have a Thrustmaster Ferrari F1 add on wheel for the T500 and the latest thing to go wrong with it is that one of the thumb wheel rotary encoders has broken. I have removed it from the wheel pending replacement but a third party component supplier cannot assist me with an alternate component because there are no specification printed on the encoder itself. Thrustmaster replacement components aren't competitively priced IMHO and I was going to take the opportunity to replace it with something with better build quality, BUT.... I don't know the specs to pass onto the component supplier to buy the correct replacement.

Can anyone help? I have pictures of the damaged encoder. BTW, the unit is out of warranty.

Cheers, Mike.

 

[nlh92]

Did you ever find the right parts for this as I now need to replace mine. Any old links I find people have given no longer work

 

[Mike Swannick]

Did you ever find the right parts for this as I now need to replace mine. Any old links I find people have given no longer work

No I didn't. I ended up having to remove some of the plastic to enable a resolder of the connections. It works but looks pikey. I've been saving up and a whole new rig is on the horizon so I have just accepted that it's now a disposable item, which is a bit sad really.

 

[nlh92]

No I didn't. I ended up having to remove some of the plastic to enable a resolder of the connections. It works but looks pikey. I've been saving up and a whole new rig is on the horizon so I have just accepted that it's now a disposable item, which is a bit sad really.

How do you get the black plastic dial off the end of the encoder?

 

[Mike Swannick]

How do you get the black plastic dial off the end of the encoder?

I didn't have to. My issue was with the internal connections. I'm sure that the rotary thumb wheel pulled off if I recall, but it was a while ago

 

[SauroHD]

maybe this???

Rotary Encoder CTS288 : Leo Bodnar Electronics

Leo Bodnar Electronics Rotary Encoder CTS288 - What is an encoder? Click here to find out Model Number 288T232R161A2 Features - 16 detents per revolution - 1 pulse per detent - 1:1 mode in our encoder config software - Shaft diameter: 1/4" Components Included - CTS288 Encoder - Mounting Hardware...

www.leobodnar.com

short shaft version

Rotary Encoder CTS288 - Short : Leo Bodnar Electronics

Leo Bodnar Electronics Rotary Encoder CTS288 - Short - What is an encoder? Click here to find out Short shaft version of regular CTS288 Features - Shaft Length: 10.5mm - 16 detents per revolution - 1 pulse per detent - 1:1 mode in our encoder config software - Shaft diameter: 1/4" Components...

www.leobodnar.com

 

[SauroHD]

i have same problem but i haven't unmount my wheel... if one of this rotary is good i purchase him immediately!!!

 

[SauroHD]

ok, solved!!!!!
i buyed this encoder:

https://www.amazon.it/gp/product/B08728PS6N/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

after a little adaption works very well, it's a bit more easy to rotate but now i have ABS controller!!!!
obviously the button don't work and in fact i cut his contacts to install the encoder in right position