Track disappears to white space

Mattie941 · Dec 4, 2022

Hello,

I have had this issue with a couple of tracks now and I can't figure it out. I load the track no problem and for a split second, everything is normal. However, after ~ 1 second the track and view disappears and everything becomes white (see image). It's white in every view and even when I go to track. Any ideas what could be causing this?

Cheers

ajrf · Jan 16, 2023

This is caused by fog. Look for fog parameters on the AIW, look for those on a track which doesn't have that issue and copy the parameters into the problematic track. Try these:

IntermediateFogLevel=(0.1450) // Combined wetness factor where intermediate values are used (sunny fog values are in SCN file!)
IntermediateFogPlanes=(0.0,1500.0) // Fog planes at intermediate wetness
RainyFogPlanes=(0.0,900.0) // Fog planes at full monsoon
IntermediateFogColor=(181.3,181.3,181.3) // Fog color at intermediate wetness (RGB, 0-255 each)
RainyFogColor=(137.5,137.5,137.5) // Fog color at full monsoon (RGB, 0-255 each)
FogDensity=(0.00125,0.01000) // Fog density only works on some video cards (intermediate, monsoon)
RainyDarkness=(0.95000,0.85000) // Overcast light value, monsoon light value