TS-PC FFB / Setup

[thepharcyde]

I got a new wheel and have RRE setup amazingly well using the default profile.
RF2 not so good, FFB feels lumpy and not smooth, and have turned down the car FFB to about 60 for the new GT3 pack, but I still do not feel connected to the car and feel I'm driving different set of cars to everyone else?

Please help

I initially plugged in the wheel, but is it normal you have to map all of the inputs even though there is a TS-PC profile; surely I'm missing something?

 

[davehenrie]

60(or 70 to 75ish), 100,100, 0,0 in the TM control panel
Try smoothing to 1, minim ffb goose that up a little.. Search here for TS-500 threads. A-lot of the same information works on the TS-PC

 

[thepharcyde]

I just realised mapping in the control panel, you need to set min/cntr/max too! That's helped

 

[MPortnoy]

I believe I have Min FFB at 3, smoothing at 2, gain on TM control panel at 70% and specific car FFB on the GT3's close to 1.00 which probably translates to something similar to davehenrie's setup and my wheel feels amazingly good.

 

[thepharcyde]

I believe I have Min FFB at 3, smoothing at 2, gain on TM control panel at 70% and specific car FFB on the GT3's close to 1.00 which probably translates to something similar to davehenrie's setup and my wheel feels amazingly good.

I will give it a try, thank you