Apps Tyre Buddy v1.3.2

[beckylou_1]

beckylou_1 submitted a new resource:

Tyre Buddy - Sort out your Camber and PSI

This simple app sits on your dashboard and helps you fine tune your camber and PSI.
The lines do not represent absolute tyre temperatures; they represent a correct and even balance of temperature across the tyre; even if they are cold.

This app has only been tested on GT3 cars.

After 3 clean laps... (don't spin)
If the pink line is above the mid-point raise PSI
If the pink line is below the mid-point lower PSI
If the camber line is orange or red reduce camber
If the camber line is not...

Read more about this resource...

 

[carricudizilla]

Does it work with RSS cars?

 

[beckylou_1]

Does it work with RSS cars?

the app will work with all cars;
However the optimal tyre temperature spread might be different for different cars.
i do know it's 10°C for GT3 - if the optimum spread is 10°C for your car it should work perfectly.
At the moment it's first stab at getting the app working; later down the road I'll look into other cars.

 

[vanbeats]

Is it a simhub app or AC app

 

[Semplix]

Is it a simhub app or AC app

AC App

 

[CrispStarling]

I honestly can't understand what the lines mean, which is one for camber which one is for psi ?

Can you explain to me which is which in this photo ??

 

[beckylou_1]

I honestly can't understand what the lines mean, which is one for camber which one is for psi ?

Can you explain to me which is which in this photo ??

There's an explanation photo in the description

however...
front left - good
front right - too high PSI (maybe too low camber)
rear left - too much camber
front rear - too high PSI (maybe too high camber)

you have to fix the PSI before you fix the camber
The purple line (above or below the green line) will tell you to put the PSI up or down; if it's below take out PSI. if it's above add PSI.

 

[CrispStarling]

There's an explanation photo in the description

however...
front left - good
front right - too high PSI (maybe too low camber)
rear left - too much camber
front rear - too high PSI (maybe too high camber)

you have to fix the PSI before you fix the camber
The purple line (above or below the green line) will tell you to put the PSI up or down; if it's below take out PSI. if it's above add PSI.

I know there an explanation but its not that intuative still.

AH ok so first psi and then Camber, ok then ill try that. How is the rear left having too much camber if its almost green its not orange nor red, like your description said?

 

[wouzsp]

it doesn't work with arch's nsx na1 all is still blue after 3 laps

 

[wouzsp]

after 4 laps

 

[Cydrec]

the idea is really very interesting to complete or replace Camber Extravaganza. I installed Tire Buddy 0.0.1 alpha with Content Manager, activated in the list of applications, but once on circuit: Nothing. Tire Buddy does not appear in the management panel on the right of the screen.
This is exactly the app I'm looking for to tune the SLS AMG Kunos Simulationi and the updated SLS AMG Black Series by Jerry Wei!

 

[Please Stop This]

@beckylou_1 when doing this:
from lib.sim_info import info

you must have ctype somewhere too, if you have some other apps installed, they might already have this, but standalone your app doesnt work

@Cydrec
Attached a fixed version, remove ".txt" to get a zip file:

 

[Cydrec]

@Please Stop This After several automatic and manual installations of this software I was finally able to make it work. Content Manager free version unable to uninstall anymore mod?
I see in your patch that a lot of "py" files are missing ?

 

[Please Stop This]

what you mean there is more in there,

 

[beckylou_1]

beckylou_1 updated Tyre Buddy with a new update entry:

Update 0.1.0

v0.1.0 alpha
Complete re-write
Added CSP compatible config
IMO & Core Colours are now calculated using LUTs
refactor tyres GUI: scale of 0 to 1 & multiply that by window widthXheight
Bars are bolder so they can be seen without squinting
Added core temp guage
Added PSI indicator

Read the rest of this update entry...

 

[AdznKi]

I know I'm being thick, pls forgive me but I can't see this, can't find it anywhere after I've added it to CM ???

 

[beckylou_1]

I know I'm being thick, pls forgive me but I can't see this, can't find it anywhere after I've added it to CM ???

I've had a look; CM doesn't install it properly all the .py files are missing. It's best to copy the folder manually from the zip.

 

[beckylou_1]

beckylou_1 updated Tyre Buddy with a new update entry:

Hotfix

Fixed some teething problems with CM Settings manager.

Read the rest of this update entry...

 

[Please Stop This]

in the config-default.ini
i had to remove the decimal part for this, you read int, it fails, as its a float...

(TyreBuddy\lib\config.py -> around line 55)

 

[ZeroHo--]

How do I use it, I run a few laps, but it doesn't respond