PC2 Unplayable

The36thChamber · Sep 22, 2017

pretty unplayable for me right now, I have main performance sim pedals, and I when I configure my pedal inputs I am 50% pedal its 100% in game and i can't fix it. im locking up way to much.

when I do get driving the ffb feels good, could use some adjustments, but i love fighting the car. just the pedals area nightmare right now.

Oh and that I cant click anything from my wheel I have to use the mouse to select.

Kyle Pearson · Sep 22, 2017

The36thChamber said:
pretty unplayable for me right now, I have main performance sim pedals, and I when I configure my pedal inputs I am 50% pedal its 100% in game and i can't fix it. im locking up way to much.

If your pedal only has about 50% travel, that should be 100% after calibration. It's doing it right. Try either (or both):

* Setting the braking sensitivity to between 35-40
* In the car setup, decreasing the brake pressure

I use the Protosimtech pedals so my pedal travel is around the same. I have my braking sensitivity set to around 38.

The36thChamber · Sep 22, 2017

Kyle Pearson said:
If your pedal only has about 50% travel, that should be 100% after calibration. It's doing it right. Try either (or both):

* Setting the braking sensitivity to between 35-40
* In the car setup, decreasing the brake pressure

I use the Protosimtech pedals so my pedal travel is around the same. I have my braking sensitivity set to around 38.

thanks, I must be blind, for some reason I didn't see sensitivity tab.

Kyle Pearson · Sep 22, 2017

The36thChamber said:
thanks, I must be blind, for some reason I didn't see sensitivity tab.

If you haven't found it yet, in the Controls menu, use the Configuration tab. It will contain the sensitivity settings.

Jdizzy42 · Sep 22, 2017

I'm stuck at work and haven't got a chance to try the game out yet, but I did check out the ISRTV review. One thing he mentioned was that by default brake sensitivity is set to 30 or somewhere around that. Apparently setting it to 50 gives you 1 to 1 ratio to your input to what happens in game. So if your using a load cell it should be set to 50.

Kyle Pearson · Sep 22, 2017

It will depend on your pedals. If you don't have near 100% travel, I've found making it slightly less linear works better for my pedals. But, yes, see what it defaults and try it a little lower and a little higher to see what works best. 50 is not going to work for everyone.

The36thChamber · Sep 22, 2017

awesome thanks guys, any ffb tweaks you have done?

Kyle Pearson · Sep 22, 2017

The36thChamber said:
awesome thanks guys, any ffb tweaks you have done?

I always prefered a little SoP (Seat of the Pants) feeling with SMS's FFB, so that will be increasing Tone if you are using the Informative preset. I increase Tone to about 58 and FX to 55. That was about it for me. You can go wild with tweak files again (on the PC) but I didn't really feel the need for it.

The36thChamber · Sep 22, 2017

Kyle Pearson said:
It will depend on your pedals. If you don't have near 100% travel, I've found making it slightly less linear works better for my pedals. But, yes, see what it defaults and try it a little lower and a little higher to see what works best. 50 is not going to work for everyone.

well messing with those didn't make any difference. i took it down to 0 and still would be at 100% when im at 50-60% on my end.

The36thChamber · Sep 22, 2017

finally got it to configure, i don't know what i did but it works. haha. now I just need a button on my wheel to let me click instead of using the mouse

Dexter · Sep 22, 2017

The36thChamber said:
finally got it to configure, i don't know what i did but it works. haha. now I just need a button on my wheel to let me click instead of using the mouse

what wheel and pedals use ?