Friend has just made me a small USB “pedal rumble” device to be used with Sim hub. All fitted but for the life of me can’t get the PC to recognise or download the driver through at least 5 different ports and every time I get the beep when connecting but also the yellow triangle with exclamation mark. When I then try to update driver it comes up with “The drivers for this device are not installed (code 28). Its definitely not the USB port as I’ve removed a working device and tried it but get the same result. I’ve uninstalled the device and re booted but again the same issue. I then plugged it into my Surface Pro and it started to download and install straight away. Any suggestions on what to try next please?
USB Device Issue
- Thread starter tony wright
- Start date
check usb legacy settings in bios?
Sorry, should of include an extra sentence “I’m not that great with PC’s”
I’ll Google it and check, but not sure what I’m looking for?
looks like its a way to turn on the USB port, but as mentioned above the port definitely works as I removed a working usb device to check it.
I’ll Google it and check, but not sure what I’m looking for?looks like its a way to turn on the USB port, but as mentioned above the port definitely works as I removed a working usb device to check it.
Last edited:
read last answer and whole thread too here: https://superuser.com/a/539791
basically find usb legacy option in bios, turn it on
or if you find something a like usb2/usb3 option, set it to usb2
basically find usb legacy option in bios, turn it on
or if you find something a like usb2/usb3 option, set it to usb2
Great, I'll have a read and give it a go tomorrow
