Virtual Mirror Vertical Offset

[Ian Watkins]

Just a quick post to share something I discovered recently. I couldn't find anything about this anywhere, so thought it might be useful for others.

I run a 32:9 monitor (Samsung G9) and have been experimenting with triple monitor mode Vs single mode with projection correction. Annoyingly, when I run high levels of protection correction, the virtual mirror falls off the top of the screen.

It turns out that the hud config file (in Documents/Assetto Corsa Competizione), has a line for "virtual mirror vertical offset". Setting this to about 5 brings the mirror back down to a visible position for me with Fov 34 and projection correction 0.7.

 

[Camaru]

thank you so much! was searching for something like this but couldn´t find it myself.

 

[icedrey]

Oh my god! In the same file I found the line to resize the virtual mirror. Because of my FOV of 27 using the Ferrari was always troublesome because I couldn't see the in car mirror correctly, and using the virtual mirror took way too much of my screen. You can resize the virtual mirror by adjusting the "virtualMirrorSize": option. I took it down from 0.15 to 0.12 and it makes all the difference!

 

[AmazingReflex]

I run a smaller virtual mirror and move it down a bit. It saves a small amount of FPS I think as well. I can set it to a low resolution but because it's so small it still looks OK.

 

[Zytok]

Has anyone found a way of getting rid of the visible vertical lines and non equal lighting on a virtual triple? I'm running a g9 and find it most off putting

 

[pstoppani]

Has anyone found a way of getting rid of the visible vertical lines and non equal lighting on a virtual triple? I'm running a g9 and find it most off putting

I switched single monitor mode with Projection Correction enabled (in the View Options) and it's just like fake triples without the lines

 

[KellyGreenhoe]

Just a quick post to share something I discovered recently. I couldn't find anything about this anywhere, so thought it might be useful for others.

I run a 32:9 monitor (Samsung G9) and have been experimenting with triple monitor mode Vs single mode with projection correction. Annoyingly, when I run high levels of protection correction, the virtual mirror falls off the top of the screen.

It turns out that the hud config file (in Documents/Assetto Corsa Competizione), has a line for "virtual mirror vertical offset". Setting this to about 5 brings the mirror back down to a visible position for me with Fov 34 and projection correction 0.7.

My Hud file in the Config folder only has one line for the vertical mirror on or off... any idea why mine wouldn't show the other two lines with size and vertical offset?

 

[Kai Syvertsen]

Doesn't show up for me either.

 

[Ian Watkins]

I think a more recent update now allows you to adjust the mirror position in the in game menu?

 

[novi13]

My virtual mirror appears in the middle of the screen so I have tried to add that comand line , because it does not appear in the document but it does not work for me and no options for moving the virtual mirror in a 2 year old game is shameful

 

[KellyGreenhoe]

My virtual mirror appears in the middle of the screen so I have tried to add that comand line , because it does not appear in the document but it does not work for me and no options for moving the virtual mirror in a 2 year old game is shameful

I ended up finding the setting right there in the game... no need to go into any files anymroe.

 

[novi13]

I ended up finding the setting right there in the game... no need to go into any files anymroe.

Where ? Cuz im not seeing it anywhere

 

[zomgfast]

Where ? Cuz im not seeing it anywhere

pause while you're driving > view settings > then scroll through the tabs on the view menu until you find the one for virtual mirrors

 

[KawasakiNL]

pause while you're driving > view settings > then scroll through the tabs on the view menu until you find the one for virtual mirrors

ty