Wer road reflection.

[Paddler]

I do not get wet road reflection and then the physics seem to be similar as to dry track. When I change some AA setting, the wet reflection is back and the physics are "wet" also. But next time with same setting road reflection is gone again? Any advice? I believe I had the same problem with PC2.

 

[FRSSNIT]

I noticed that in VR with the first level of rain, the effects are very mild. Also, the best way to see it in VR is to the MSAA graphic option i found, in medium or high you get the best resolution. If in VR still make sure that you not running all effects on low too.

Other than that it could be a BETA issue of compatibility or something that you might have to wait to the next update. Since they share the same engine with PC2 you could check this:

02: OPTIONS AND SETTINGS - Project CARS

www.projectcarsgame.com

If its VR related maybe this will be of some help:

PC2 - VR Guide - Setup, Settings and general tips

Sorry for the long post, I wanted it to be as detailed as possible (within reason) so you get all the information I can share, hopefully this will help you get the best experience. This guide will first cover some basic tips and general points, please ask for more details if needed. Following...

www.racedepartment.com

Good luck!