Wheel Rotation Problem With G27.

[Wesley Soares]

Hi, please, if you know how, help me with my little problem. My wheel doesnt match with the rotation of virtual wheel on car. My profile is in 900 degrees rotation and i put on rFactor 2 on Vehicle Set a check. Any suggestions to solve this? I was perfectly before i formated my PC, but now i cant get this right.

 

[Gijs van Elderen]

It doesn't matter what degree of rotation you put in your profiler.
You'll need to allow the game to adjust settings.

Overall Stength 100%
Spring, damper: 0%

In this case you see that the vehicle uses 450 degrees. Match it manually in you profiler or "allow the game to adjust settings."

 

[Wesley Soares]

i really appreciate your attention... thank you, but i did exactly this setup and my wheel still not on same rotation...

 

[Gijs van Elderen]

What car are you using? Default content should be OK.

 

[Wesley Soares]

I was racing with Flat6. I`ll try default!

 

[Sicario Del Toro]

In control setup turn your wheel full right and press Max now turn to full left press Max .

Edit , sometimes with mods you might have to adjust sensitivity to match wheel .

 

[Wesley Soares]

What car are you using? Default content should be OK.

You`re right! On default cars it all good! _ _

 

[Wesley Soares]

In control setup turn your wheel full right and press Max now turn to full left press Max .

Edit , sometimes with mods you might have to adjust sensitivity to match wheel .

Very nice tip, my friend.. I`ll try right now.