Cars Alfa Romeo 155 TI V6 DTM & hillclimb 1.2

[rpmmod]

rpmmod submitted a new resource:

Alfa Romeo 155 TI V6 hillclimb - Alfa Romeo 155 TI V6 hillclimb with complex aero.

INSTALLATION INSTRUCTIONS :

- Extract the folder "alfa_romeo_155_v6_hillclimb" in content\cars.

- Copy from folder "ks_alfa_romeo_155_v6" all the files and folders exept "data.acd" files and "ui" folder, say yes for merge folder "sfx".

- In sfx folder rename "ks_alfa_romeo_155_v6.bank" to "alfa_romeo_155_v6_hillclimb.bank" (delete "ks_" and add "_hillclimb")

Please help me to improve this cars, say me all the problems, suggestions, etc in support tab.

Read more about this resource...

 

[rpmmod]

rpmmod updated Alfa Romeo 155 TI V6 hillclimb with a new update entry:

Completely reworked aero and new tires.

Better aero, better tires.

Read the rest of this update entry...

 

[rpmmod]

rpmmod updated Alfa Romeo 155 TI V6 hillclimb with a new update entry:

Changes on aero and add 2 DTM versions

Various changes on aero? better ABS and add DTM 93 & 94 versions with opponents (alfa 155 and mercedes 190).

Read the rest of this update entry...

 

[rpmmod]

rpmmod updated Alfa Romeo 155 TI V6 DTM & hillclimb with a new update entry:

correction in the installation instructions

Nothing new.

Read the rest of this update entry...

 

[rpmmod]

rpmmod updated Alfa Romeo 155 TI V6 DTM & hillclimb with a new update entry:

420 hp and little changes.

- 420hp for DTM 94.
- Little change on aero (less oversteer on tight turns).
- For hillclimb versions new tires and changes on starting setup.

For updating just delete "ui" folders and "data.acd" and copy the new ones.

Read the rest of this update entry...

 

[tonydean2]

Please don't laugh but I'm a complete rookie at this. I have absolutely no idea how to copy internal files. Can someone please help as I'm completely lost and don't want to *&%$ anything up. Thanks in anticipation

 

[rpmmod]

The cars (original and mods) are in Steam/steamapps/common/assettocorsa/content/cars , so extract the folder that are in the zip here.

In this "cars" folder found "ks_alfa_romeo_155_V6" and copy all the files and folders that are in this folder exept "data.acd" files and "ui" folder, paste in the folders you have extracted ("ks_alfa_romeo_155_v6_dtm_93", "alfa_romeo_155_v6_hillclimb", etc; not in "ks_mercedes_190_evo2_dtm93_oppo") and say yes for merge folder "sfx".

Then in all this folder, in "sfx" folder rename the files ".bank" with the same name as the folder, for example : "alfa_romeo_155_v6_hillclimb.bank"

I can't share this files because it's property of Kunos.
If you have problem come back.

 

[P a r a l l a x]

this replaces archives of the dlc or is a standalone version?

 

[rpmmod]

There are standalone versions.

 

[Stix_09]

@Zen27

I really want to make the normal version of the alfa romeo v6 155 ti DTM sequential gearbox, can someone help me with it?

1) First, don't put support question in a review section

2)Next to Answer: To allow paddle shifters.
Simple way is to use Car Tuner app (Link) to unpack a copy of the car so u can access the un-encrypted data files.
(for support on how to use that app go there)

Then modify the following line in the drivetrain.ini (to allow paddle shifters)

​

[GEARBOX]​

...​

SUPPORTS_SHIFTER=0 ; 1=Car supports shifter, 0=car supports only paddles ​

...​

You can also make changes to the clutch in section [AUTOCLUTCH]
These files have comments so its not to hard to work it out (and you can look at other cars settings to figure it out)

NOTE: any modification of data files will cause problems with online play as car will now mismatch online with original car. As its a modified copy it will not work online unless all players have same modified car (and I think it also needs to be replacked and encrypted too).

 

[rpmmod]

Thank you Stix for the response, I have done two data.acd one with H patern other with sequential, it's marked at the bottom of the short description, he had to be very in a hurry.

You also have to change :

[GEARBOX]
CHANGE_UP_TIME=75 ; change up time in milliseconds
CHANGE_DN_TIME=120 ; change down time in milliseconds
AUTO_CUTOFF_TIME=80 ; Auto cutoff time for upshifts in milliseconds, 0 to disable

[DOWNSHIFT_PROFILE]
POINT_0=20 ; Time to reach fully depress clutch
POINT_1=115 ; Time to start releasing clutch
POINT_2=450

And maybe driver animation.

 

[Stix_09]

Thank you Stix for the response, I have done two data.acd one with H patern other with sequential, it's marked at the bottom of the short description, he had to be very in a hurry.

You also have to change :

[GEARBOX]
CHANGE_UP_TIME=75 ; change up time in milliseconds
CHANGE_DN_TIME=120 ; change down time in milliseconds
AUTO_CUTOFF_TIME=80 ; Auto cutoff time for upshifts in milliseconds, 0 to disable

[DOWNSHIFT_PROFILE]
POINT_0=20 ; Time to reach fully depress clutch
POINT_1=115 ; Time to start releasing clutch
POINT_2=450

And maybe driver animation.

Thanks mate ,good to know. I think his question related to the normal kunos car (how to make it use a sequential gearbox). (My personal pref is to use h-pattern when avail, more fun.)

 

[peppinosan]

Hi could you tell me how you managed to activate the handbrake? i have some auto mods where it doesn't work.
thank you

 

[rpmmod]

In data : brake.ini -> handbrake

 

[peppinosan]

I don't understand you can be clearer thanks. where I find the data file