hey hi
this morning at about 1am I decided to install nHancer and try out the AA no lines profile I had downloaded from somewhere....have used nHancer before but since I recently done a fresh install of windows the program needed to be reinstalled
thinking ok this will take 10 minutes or so and I'll be back in the game...ha right
go to install and remember oh yeah I need the NET framework ver 3.5 thingy ...so I find a source for that and see there's a newer ver 4. so I think might as well get that instead...20 minutes later it's installed only to find that nHancer's installer is still refusing to do it's thing because I don't have the 3.5 ver of the NET framework....christ so I have to remove the 4. ver go and get the 3.5 ver and start all over again
so about an hour later I finally have nHancer installed...but guess what?...it's not nHancer any more but is now called the nVidia Inspecter.....and after another hour of fighting with my firewall to allow the damned thing to open and discovering through trial and error that I had to open the .exe by right clicking and choosing administrator rights I finally had it up and running...only to realize of course that the profile I wanted to check out won't work because it was from the older version of nHancer....arrrggghhh!
allright to my question
If you're running this same program what are the settings you recommend?...I've experimented with the different super sampling settings but I'm unsure about the best way of going about this
..I'm especially confused about the proper antialiasing mode....do I choose
1.the application controlled
2.over ride any application setting
3.enhance the application setting
any help will be appreciated
this morning at about 1am I decided to install nHancer and try out the AA no lines profile I had downloaded from somewhere....have used nHancer before but since I recently done a fresh install of windows the program needed to be reinstalled
thinking ok this will take 10 minutes or so and I'll be back in the game...ha right
go to install and remember oh yeah I need the NET framework ver 3.5 thingy ...so I find a source for that and see there's a newer ver 4. so I think might as well get that instead...20 minutes later it's installed only to find that nHancer's installer is still refusing to do it's thing because I don't have the 3.5 ver of the NET framework....christ so I have to remove the 4. ver go and get the 3.5 ver and start all over again
so about an hour later I finally have nHancer installed...but guess what?...it's not nHancer any more but is now called the nVidia Inspecter.....and after another hour of fighting with my firewall to allow the damned thing to open and discovering through trial and error that I had to open the .exe by right clicking and choosing administrator rights I finally had it up and running...only to realize of course that the profile I wanted to check out won't work because it was from the older version of nHancer....arrrggghhh!
allright to my question
If you're running this same program what are the settings you recommend?...I've experimented with the different super sampling settings but I'm unsure about the best way of going about this
..I'm especially confused about the proper antialiasing mode....do I choose
1.the application controlled
2.over ride any application setting
3.enhance the application setting
any help will be appreciated