Misc BTB Bob's track builder ZaXXon methode new project 2018-05-28

[MIKA7835]

MIKA7835 submitted a new resource:

BTB Bob's track builder ZaXXon methode new project - BTB Zaxxon method Bob's track builder new project folder

Working script for build track whith elevation data and KML files with Google Earth (Only 7.0.2.8415 version works with pygoogleearth script) and import to BTB. see Documentation inside

Read more about this resource...

 

[TXAKURRAAA]

I have a problem. I do all the right things, though I never go out. I never seen the lines "line loop" .I use the zgui (1) and when I try to do the "s4_terrain", I get this error:
--------------error---------------
En X (lamalla2,.msh)
-3221.077962<-1507.083792 -> ok
2853.920621>12306.000000 -> Failed

En Z (lamalla2,.msh)
-2141.810834<-778.791592 -> ok
2508.195967>12306.000000 -> Failed

-------------------------------------------multitrack 12/11/10
---------------------- Next step ---- NORMAL
-------- short form -Check that all the check messages above are "ok"
procesar_nodostxt p _n
----------------------------------- fid = -1
octave-3.2.3.exe:11:c:\project

 

[ebrich]

Is it possible to send me a link to your project folder and I'll take a look?

 

[tx3b4s]

sorry men. i dont see this messeage. I can´t send you a messeage. the problem is the same now

 

[tx3b4s]

tienes el mismo problema está resuelto?

 

[tx3b4s]

[QUOTE = "ebrich, publicación: 2921614, miembro: 38948"]
¿Es posible enviarme un enlace a la carpeta de su proyecto y lo echaré un vistazo?
[/ CITAR]
i cant send you a messeage

 

[Baktru]

I get a problem creating the sons... And obviously as I am making rally stages in Flanders there are plenty of side roads...

> create_sons(60)
warning: implicit conversion from scalar to string
The filename, directory name, or volume label syntax is incorrect.
warning: implicit conversion from scalar to string
The filename, directory name, or volume label syntax is incorrect.
error: `caminos' undefined near line 68 column 14
error: called from:
error: c:\project\father\scripts\create_sons.m at line 68, column 13

 

[Baktru]

Oddly it works for 1 or 5 or 59. I still get an error about xcopy not being recognized then though.

 

[Baktru]

Ok I got through that all. Now how though I get the actual height data I need into it all?

 

[Baktru]

After quite a lot more experimenting with the Zaxxon Method I now seem to be permanently stuck.

I can make it all the way to the step to add walls. That one quits with an error about accessing a Matrix out of bounds. Logical because the matrix is empty. Why is it empty? Because I only have this:

1 2 3 2 5235 0 8957 8956 14135
2 2 3 14129 13229 0 26496 20830 23850
3 2 3 23129 23134 0 24747 39784 20482
4 2 3 20547 27945 0 11278 22473 53072

in elements.txt in s7_walls.

From the code I can see that the 3rd or 4th column there should have values 111, 222 or 333. BEFORE accept_mesh my elements.txt file was a lot lot bigger as one would expect so I suspect something's going wrong with accept_mesh.

Has anyone had issues at that point before?? And more importantly how did it get fixed?

B.

 

[Baktru]

I have a problem. I do all the right things, though I never go out. I never seen the lines "line loop" .I use the zgui (1) and when I try to do the "s4_terrain", I get this error:
--------------error---------------
En X (lamalla2,.msh)
-3221.077962<-1507.083792 -> ok
2853.920621>12306.000000 -> Failed

En Z (lamalla2,.msh)
-2141.810834<-778.791592 -> ok
2508.195967>12306.000000 -> Failed

-------------------------------------------multitrack 12/11/10
---------------------- Next step ---- NORMAL
-------- short form -Check that all the check messages above are "ok"
procesar_nodostxt p _n
----------------------------------- fid = -1
octave-3.2.3.exe:11:c:\project

I had this problem as well up to just about 10 minutes ago. The cause of this is an incorrect version of GMSH that saves its meshes in not quite the same format. You need to get gmsh 2.4.2 and not the latest version.