Hi there, as i'm new to track designing with BTB, don't expect any full perfection in none of my designs in the short run, as i get used to Brendon Pywell's ultimate masterpiece, that could shave off time in designing tracks for rFactor & RBR, and in the smallest learning curve.
But anyway, i introduce you...Circuit of Babel (For those who remember the Tower of Babel)
A ficticious track for rFactor, with insane changes in elevations, as well as the longest main straight, especially for modern hi tech open wheel cars where the search for a wild fast speed is a must
The track is 8.55km/5.31mi long, but don't expect for an immediate release, as what i only did so far, is the skeleton of the track, being this my initial phase of design, and the time i took in the sub-phases
Phase 1 - Track Skeleton
1. Placement of nodes: 55.3 Seconds
2. Unraveling of nodes: 26 Minutes 9 Seconds
3. Adding elevation: 5 Minutes 33.3 Seconds
Total this phase: 32 Minutes 38.1 Seconds
But anyway, i introduce you...Circuit of Babel (For those who remember the Tower of Babel)
A ficticious track for rFactor, with insane changes in elevations, as well as the longest main straight, especially for modern hi tech open wheel cars where the search for a wild fast speed is a must
The track is 8.55km/5.31mi long, but don't expect for an immediate release, as what i only did so far, is the skeleton of the track, being this my initial phase of design, and the time i took in the sub-phases
Phase 1 - Track Skeleton
1. Placement of nodes: 55.3 Seconds
2. Unraveling of nodes: 26 Minutes 9 Seconds
3. Adding elevation: 5 Minutes 33.3 Seconds
Total this phase: 32 Minutes 38.1 Seconds