I'd try the XXX-thread at WMD.
All tiers should be able to reply to threads (just not start them). Anyway, your issue has been brought to attention over 'there'.1) I do not have enough privileges to post there.
I actually did try that one, now I have the 'mouse problem' on the main menu, means I cannot enter the options. What is happening is, is that the focus scwitches a couple of times between Solo Career and whatever there is on the main screen, without the chance to click anywhere.May be an obvious suggestion but have you tried deleting your profile in mydocuments/CARS and starting form scratch.
The calibration is only required in case of a shifter, isnt it? I 'only' have CSPv1 (connected via USB) and the CSW.I recently had some issues getting Pcars to work with my CSW. I was unable to assign the proper functions to the buttons I wanted - including pedals and shifters. As it turns out, I had just added the CSS-SQ shifter but, had not yet calibrated it so Pcars was seeing multiple inputs at once. Once I performed the calibration as per the Fanatec calibration video, the problem was solved.
Perhaps you have something that is not properly calibrated.
Also, it's highly recommended that you delete the entire "Cars" folder in your documents folder after each update to avoid any conflicts. It does mean that you have to reset your preferences after updates but, also avoids possible issues.
It might be worth your while to re-calibrate the wheel anyway just to eliminate any potential issues.The calibration is only required in case of a shifter, isnt it? I 'only' have CSPv1 (connected via USB) and the CSW.
I deleted yesterday the game itself (from Steam) and my folder in my documents folder.
The only calibration I am aware off is the centering, just did that, but does not change anything (though there is actually a slight problem with that as it does not go to center position when switching on, but even by the fanatec tool it is off center, the center is where it is supposed to be, if you understand what I mean ), Pedals on USB.It might be worth your while to re-calibrate the wheel anyway just to eliminate any potential issues.
Do you have the pedals plugged into the wheel base or directly via USB? Mine are direct to PC - haven't tried running them to the base.