Dashboard BMW M6 GT3

[Pset]

Hello,
I present to you my project outstanding achievement, the dashboard of the BMW M6 GT3.
3D printing for the case, Arduino for electronics, Nextion HMI 4.3 "and 16 leds.

The Project :

3d Model in Fusion 360 :

After many test of 3d print :

Electronics :

First test on my Accuforce V2 :

Nextion Template in Assetto Corsa :

To follow the installation and wiring of the 16 LEDs...

 

[Pset]

I thank for their help, @Wotever and @Jens Roos .

 

[Pav997]

This is excellent!

 

[Chris_I]

Very nice done! I'm running a 5" raspberry pi screen for more then a year without a housing. Need to start making one too.

 

[James Robertson]

Great work, look forward to the wiring video

 

[BenKay]

Will you be making the STL's etc. available? It looks great.

 

[bavomeister]

Nice one!

When you connect the Nextion display to the Arduino board, can you use the rest of the arduino to connect it to buttons (to make a steering wheel with display)?

 

[Pset]

Nice one!

When you connect the Nextion display to the Arduino board, can you use the rest of the arduino to connect it to buttons (to make a steering wheel with display)?

only leds, but button management is possible.

 

[Pset]

Wiring Leds.

First test :

 

[Pset]

First test on track :

 

[Pset]

Will you be making the STL's etc. available? It looks great.

Yes very soon

 

[Chris_I]

Yes very soon

Can you also share a component list?

 

[Pset]

Yes here the component :
WS2812B Black LED :
https://www.amazon.fr/gp/product/B01DC0J3UM/

Pro Micro ATmega32U4 5V/16MHz :
https://www.amazon.fr/gp/product/B019SXN84E/

Nextion NX4827T043 4.3 Inch HMI
https://www.banggood.com/4_3-Inch-N...h-TFT-LCD-Module-Display-Panel-p-1114160.html

https://fr.aliexpress.com/item/30pc...aded-Rivet-Inserts-Nut-hw111/32693068977.html
Flat Head Threaded Rivet Insert

And for 3D Print :

ABS ICE FILAMENTS Romantic Red
https://www.amazon.fr/gp/product/B017HAH6C0/

PLA SUNLU Grey
https://www.amazon.fr/gp/product/B075H649NR/

PLA SUNLU Carbon Fiber
https://www.amazon.fr/gp/product/B07BF8HJND/

 

[Chris_I]

Many thanks for the list!!!

 

[James Robertson]

Thanks for the list , brilliant work

 

[James Robertson]

Hi Pset, thanks for posting the list. I am building a 3d printed Mclaren Wheel and was thinking of going down the arduino route. (in the past I have used Leo Bodnar SLI-F1 and Z1 LCD Display).

Would I be right in thinking this Arduino module would support buttons also and rotary encoders also?

I notice the LED`s are daisy chained together, I take it software is used to configure which light does what depending on its position in the chain, or do they have some kind of address id built in?

 

[Pset]

Hi,

I use SimHub for the management of info from the game, for LED management. I'm not sure that the Rotary encoder is taken into account, I inquire.

Your steering wheel is this one: https://www.thingiverse.com/thing:3025648

 

[James Robertson]

Hi,

I use SimHub for the management of info from the game, for LED management. I'm not sure that the Rotary encoder is taken into account, I inquire.

Your steering wheel is this one: https://www.thingiverse.com/thing:3025648

No.......Here : https://www.facebook.com/3dsimwheel/

 

[Pset]

the link is broken.

 

[James Robertson]

the link is broken.

I just reactivated the page this afternoon......it will be working again soon hopefully