Still very much beta: http://mintylamb.co.uk/display/
Compare a single display with triples etc
James
Compare a single display with triples etc
James
Display compare tool w/ FoV calcs
- Thread starter jamescarruthers
- Start date
You can indeed — that's the offset setting.
Upvote
0
Changed the name to distance to hopefully make it more obvious.
Upvote
0
Great tool,
Confirms my real life observations.
Sorry if it's not
Is it a offset to compare if you move a display closer or further away then the one you are comparing it with?
Confirms my real life observations.
Sorry if it's not
Is it a offset to compare if you move a display closer or further away then the one you are comparing it with?
Upvote
0
Great tool,
Confirms my real life observations.
Sorry if it's not
Is it a offset to compare if you move a display closer or further away then the one you are comparing it with?
The displays are at 0 distance.
View setting distance is distance away from that baseline. As in - your eyes distance away from the displays.
Each displays distance is distance from the baseline.
I probably need to have a rethink in to the names of those controls.
I think maybe offset is a better name again.
Upvote
0
Anything is possible — just depends if I have the time or skills
Upvote
0
So, having done some calculations — the 49" Samsung monitor would be 1198mm wide if flat, but is 1176mm wide with the curve.
Only 22mm different in width. Not sure I can be bothered to calculate for that.
Upvote
0
Add a couple of new features whilst also cleaning up the UI.
- Added a 320mm steering wheel in about the right place where it should be based on my own rig. This is locked to the view distance.
- Added pixel density calculation so you can get an idea of how much you can see the pixels. Anything over 35 PPD is pretty much "retina"
Upvote
0
Nice feature, but it looks way too large to me, which means our wheel distances are not similar.
Nice! I might disagree with 35 PPD being the threshold for "retina" (more like 50 PPD to avoid screen door effect for myself), but that doesn't negate the usefulness of this calculation.
Upvote
0
@Emery — I made the wheel 320mm dia and 40mm thick. It's offset around 460mm vertically and 240mm away from the viewport (eyes).
Yeah - you're probably about right — I think 35 or more means the pixels aren't too noticeable — 50 is getting closer to where you don't need any kind of antialiasing.
Yeah - you're probably about right — I think 35 or more means the pixels aren't too noticeable — 50 is getting closer to where you don't need any kind of antialiasing.
Upvote
0
Upvote
0
