hello, since the update more sound in the game f1 2017 1.13
Hi ! I'm sorry, I've not understood. Could you explain what is happening ?
hello, since the update more sound in the game f1 2017 1.13
It's on the road I had to free a little room to fit it :
Individual control for each output, easy mute and unmute, and controls available for mapping for mute/unmute, raise/reduce motor power
the simhub cuts the sound of the games f1 2017 no sound in the menu or in the race
Yeah for sure ! Since i'm alone to develop simhub I actually only starts features planned for the next releasethat is great - so i will will a separate DIY button box for shakeit
I love it
will it come with the next release?
Two things !Hola Wotever
Todavía estoy tratando de hacer que tu programa funcione
con grandes motores.
Todavía no puedo hacer que funcione bien.
el gran motor es mi objetivo
es 12 v suficiente para hacer vibrar mi copick
solo el pequeño motor funciona bien.
El medio y el grande hacen ruidos para funcionar.
con el grande, tengo que obtener el 40% para que funcione.
el medio que tengo para alcanzar el 30% para que funcione.
esto funciona muy bien, los motores dan muchos detalles de diferentes vibraciones
I still have more to try
¿Alguna idea de lo que puedo hacer para que funcione?
un saludo
Hi I tested again this morning, everything went fine, do you see the power light on the board ? it should be a solid red when the board is poweredHello Wotever
It worked, but the second exit still fails.
With the new DisplayClientV2 files the powerful engine ran without noise.
I could start at 10% that's very good and no noise.
Amazing single engine to vibrate all my copick
I think you're right it's too big
8 engines like this will be too many vibrations
I'm going to look for a smaller one.
just need to solve the second exit for everything to work perfect
8 engines like this one I think will be enough
I hope you can solve the second exit
a greeting
Hi ! Could you send me the log files ? They are available here : C:\Program Files (x86)\SimHub\logs maybe the basshaker is connecting anyway for a reasonhello, I deactiver option bass shaker this time the sound is cut on the starting grid I'm back to version simhub 6.4.0 beta works very well thank you
Hi I tested again this morning, everything went fine, do you see the power light on the board ? it should be a solid red when the board is powered
Hi ! Could you send me the log files ? They are available here : C:\Program Files (x86)\SimHub\logs maybe the basshaker is connecting anyway for a reason. Byn the way have you tried the other clue abouthello, I deactiver option bass shaker this time the sound is cut on the starting grid I'm back to version simhub 6.4.0 beta works very well thank you
Ok ! I only received the board yesterday so I had not the time to plug real motors I only took the time to solder the pins and test on an Arduino, I will look monday with real motors I have some 120w motors for testing it should be enough to see how it goes I keep you in touchHello Wotever
If the light is a deep red color
the light of the channels also lights up intensely.
I have reinstalled everything again, the result is the same.
The second output, motor 2 in your program works very well, even with the big motor without noise.
The first output, engine 1 in your program malfunctions seems to be braking and noise.
Connect my wind fans in the first output, in your program engine 1 produces noise and start working on 27% does not work well.
Also connect my fans in the second output, motor 2 works very well.
I have connected the big engine, first output in your program, engine 1, it is hard to start and there is intense noise, this output seems to be stopped.
I have also tried with different plates all do the same.
second output in your program engine 2 works very well the big engine starts over 10% is perfect
I have tried different effects in this output and it is really good it works all very well I like how your program works I can also regulate how hard I want the engine to vibrate is perfect I congratulate you Wotever.
First output in your motor program 1 There are problems does not get to work well.
I think it's a problem with the code on the board, with the DisplayClientV2 files I improve a lot and my big engine now works very well.
it only remains to solve the first output in your motor program 1.
a greeting
Hi ! Could you send me the log files ? They are available here : C:\Program Files (x86)\SimHub\logs maybe the basshaker is connecting anyway for a reason. Byn the way have you tried the other clue about
Ok ! I only received the board yesterday so I had not the time to plug real motors I only took the time to solder the pins and test on an Arduino, I will look monday with real motors I have some 120w motors for testing it should be enough to see how it goes I keep you in touch
Hi ! I'm afraid don't understand what you are trying to do. Nextion will only work through an arduino micro or a usb to ttl adapter : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Nextion-Display . Could you give me a little more details ?Hi again, New Issue.
I made my Nano to work properly but I want to use it with a 3,4 Nextion LCD.
Both are gonna be inside my new DIY Mercedes F1 Steering Wheel that I hope to finish soon .
The problem is that I don't know how to make both to work together. I only get the Nextion work,
Hi again, New Issue.
I made my Nano to work properly but I want to use it with a 3,4 Nextion LCD.
Both are gonna be inside my new DIY Mercedes F1 Steering Wheel that I hope to finish soon .
The problem is that I don't know how to make both to work together. I only get the Nextion work,
Hi @Wotever,
I really love your work with the Simhub Dash. I have a question about the Dash Studio. There is a component debug, and in the preview -- while building -- I can see all the available fields.
But when I start the dashboard and drive out of the pits, the field won't show up. I've already set the debug mode to on in the settings of SimHub.
Any idea?
Cheers!