Looks like the arduino setting file have been corrupted In C:\Program Files (x86)\SimHub\PluginsData\Common could you delete SerialDashPlugin.json then reinstall simhub ? It will restore the default one.
Thanks allot. Thats work fine.
Looks like the arduino setting file have been corrupted In C:\Program Files (x86)\SimHub\PluginsData\Common could you delete SerialDashPlugin.json then reinstall simhub ? It will restore the default one.
Concerning the integrated audio yes for sure you can use it. For the amps i'm still evaluating cheap boards on amazon, but to give a good 4x50w for instance you need a big power supply.
This is the one I'm trying now, I chained two of them for getting 4 channels : https://www.amazon.fr/gp/product/B0727WWX9S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1, but I'm struggling with powersupply, it needs at least 2.21Gigowatts . I tried it with a 12v30amps power supply I use for my 3d printer, it can give some massive shakes with no troubles, I'm now searching for a more reasonable supply, and ideally compact, but it's a little hard to find.
Are you sure something is not wrong with hardware ? This is how it goes for me with my two monster motors, like you can see it drives with no troubles both motors in any power combination :Hello Wotever
I have installed the new update 6.4.4
I have seen some changes in the shakeit motomonster board but without any result in the second exit.
I hope you can solve that little problem
a greeting
Have you tried the code given by sparkfun ? It would be interresting to see if it fails too. I've build simhub support over this code given by the manufacturer, it would be interresting to see if it's wrong too or if I made a mistake when using it in Simhub.Hello Wotever
thanks for your video and response
the engines with the gearbox are more revolutionized so you do not notice differences in the motor drive also I have a couple of them I will try with them to see results
but the engines must work without reducers to see differences
the two outputs also work for me but the second engine output 1º in your program costs more to get around 25% but it works always is the 1º engine seems to be braking this output
I have changed the board and arduino with the same result
even changing the output position motors, the 1º motor always fails
a greeting
Have you tried the code given by sparkfun ? It would be interresting to see if it fails too. I've build simhub support over this code given by the manufacturer, it would be interresting to see if it's wrong too or if I made a mistake when using it in Simhub.
During my tests (not on video) I had plenty of torque, both motors where jumping on the table when suddently changing speed from 0 to 100.
You need to upload it using arduino ide, it's the sample given by the manufacturer, it's not related to simhub, However you can use the arduino ide embedded in Simhub (located in C:\Program Files (x86)\SimHub\_Addons\Arduino\ArduinoIDE\arduino-1.6.13)Wotever
where I copy the code in SimHub
I will comment the results
I will also try to make a video
about what% your engines start
Thank you
You need to upload it using arduino ide, it's the sample given by the manufacturer, it's not related to simhub, However you can use the arduino ide embedded in Simhub (located in C:\Program Files (x86)\SimHub\_Addons\Arduino\ArduinoIDE\arduino-1.6.13)
I admit this problem really confuses me, I checked multiple times the code, tested it with both motors plugged (even if they are worm geared it's some really big motors rated for 10amps at 24v)
Could you measure the output voltage too ? I think it's really the indicator to see what's going on.
Hi ! I do that all the time,on phone/tablet or laptop it will work, make sure you don't have any antivirus coming with an integrated firewall, another issue could be that your laptop is not the same network than your main computer (it could happen if you use a "guest" wifi for instance)hello from germany, i have set up things on pc and startet the game and simhub. then i copied the http://192.168.2.101:8888/ ino the browser of the adding notebook, but it does not run. the firewall is off. is there anybody, who knows hor to run the dashes on notebook while playing it on pc?
If it's a matter of testing hardware only, you can start the arduino ide (simhub embeds one in C:\Program Files (x86)\SimHub\_Addons\Arduino\ArduinoIDE\arduino-1.6.13) and pick a led sample :Is there any way to test the RGB LED's without having to drop into a Sim to check them?
You can enter a game, hit record in SimHub, do few laps, stop recording and now you have a replay for testing. All you need to do is select the game which you did the record and hit replayIs there any way to test the RGB LED's without having to drop into a Sim to check them?
Well seen , I guess i'm a little exhausted I did not thought about itYou can enter a game, hit record in SimHub, do few laps, stop recording and now you have a replay for testing. All you need to do is select the game which you did the record and hit replay
Thank you both. I will give it a try.Well seen , I guess i'm a little exhausted I did not thought about it
Hi !I've been making my own dashboards, I've seen a car proximity radar in someone else's dashboard before so it seems to be possible, I want to make arrows on sides of my dash telling me when there is a car to my left or right but I don't know what the code is to make them work. Does anyone know what the strings are for that?
Hi bud i have a few questions if you don't mind?
I am currently doing a lot of hot lapping and am trying to make i dash just for that. Everything's going great so far and i have most of the stuff i want apart from the all time best Lap and the all time best lap delta.
I have Multilaps running atm and that shows both in game but in the DataCorePlugins the AllTimeBest is showing as 00.00.00 and DeltaToAllTimeBest is Null in Dashstudio .
The PersistantTrackerPlugins do show times though but they are of laps i have done testing so they are not that correct times as its only just started tracking the data.
It has me a bit confused now, my best lap times are coming up in content manager but i don't know if its multilap's that's controlling it all so that's why Simhub isn't picking it up.
Any ideas on what could be wrong?
Thanks