Physics How do i mod tyres so the temps don't go too high.

[Digipro]

i have downloaded a mod of an F1 car and the temp on the tyres is way too high no matter what tyre compound i use and track temp is only 22c so its not hot just a mil summers day . but the temps go over 300c very quickly like the tyre temps are wrong and go up to 400c and that's just driving it no wheels spins involved apart fropm occasional power slide out of a corner cause temps are too high, and tyre is loosing grip as the pressure goes way too high over 35 psi mainly around 38c , anyway i reduced friction in tyre file but that also meant it reduced grip so how do you alter the temperature parameters in the tyre file so the tyres don't heat up t0 much ?

thanks

 

[Storm Rider]

tyres.ini
[THERMAL_FRONT] (or _REAR)
...
FRICTION_K=
...


BTW, next time you have a question, post in the right topic:

AC Modding Questions Thread

Thought I would start a dumb questions thread for my own personal stupidity, but also a place for people to ask the quick questions without starting a new thread (Mostly so I stop flooding the forum with the questions I'm starting to have) So my first 2 questions: 1. How to do you set up the...

www.racedepartment.com

 

[Digipro]

thanks for the info have altered a few other settings as i realised its not as easy as just altering friction also several other specs needs to be adjusted too .

got the tyre working pretty good although doing the rest i don't know it took a lot of time just for the hard compound and have another 3 compounds to do.

thanks