HPP Pedals, replacement brake pin
- Thread starter crooksy
- Start date
stigs2cousin
Premium
The normal route would be to contact the manufacturer.
But I think he´s gone belly up, maybe someone knowledgeable can chime in here?
BTT:
the coupling is a standard part that can be found in industrial supply shops.
But the coupling bolt is steel and the brake lever is aluminium iirc so you should dismantle it first and check which part has the scoring.
If the wear is in the hole in the lever things get more complicated.
MFG Carsten
But I think he´s gone belly up, maybe someone knowledgeable can chime in here?
BTT:
the coupling is a standard part that can be found in industrial supply shops.
But the coupling bolt is steel and the brake lever is aluminium iirc so you should dismantle it first and check which part has the scoring.
If the wear is in the hole in the lever things get more complicated.
MFG Carsten
Yeah wish I would have contacted Mark to find out before he sold the company.
Yeah i already dismantled it and had a look the wear is definitely with the coupling bolt. I just don't know where I can source one the correct size.
It's not a massive issue just one of those niggles
Last edited:
stigs2cousin
Premium
I don't know where you live, but german Amazon has so called Gabelkopf.
Just take measurements and choose the right one.
MFG Carsten
Just take measurements and choose the right one.
MFG Carsten
I live in the US but you've helped me to look in the right direction.
Looks like they are called Clevis Spring Pins here
Once I source the correct size I'll share it here
Thanks
This is what I've found so far but can't find a US supplier:
