From Reddit
New Thrustmaster Load cell pedals?
- Thread starter thepharcyde
- Start date
Seems legit.
www.gtplanet.net
fccid.io
Thrustmaster T-LCM pedals
Just got some photos from web , anyone got further informations? I just know is load cell brake and magnetic sensors should be for throttle and clutch
www.gtplanet.net
RR-T60-T-LCM_pedal T-LCM pedal
Korean Communications Commission Conformity Assessment Status for T-LCM pedal - T-LCM pedal with Authorization ID RR-T60-T-LCM_pedal.
Upvote
0
I do have a 20kg load cell on my standard T3PA's. It's fine, albeit the base creaks.They look a bit flimsy to have a load cell brake mounted to that plastic base
I could understand if they were built like the T3PA-Pros with their all-metal construction.
Upvote
0
Which mod are you using? I have T3PA Pro's, and I've read they're different, but maybe you have the Pro's as well.
I do not have the budget to pay 250 Euro + for load cell pedals and import/shipping costs - works out at about 75% of the purchase price to get it here here - so I'm currently looking for this option.
Sorry for the off topic. I was just looking forward to this as I thought it may have been more budget friendly than others, but apparently not much.
Upvote
0
T3PA Load Cell Brake Mod - Sim Racing Solutions - Oxfordshire UK
Upgrade your T3PA pedals today! Sim Racing Solutions Load cell brake mod. For Pro and Non Pro pedal sets. Short throw shifter kits for TH8A & TH8RS.
www.simracingsolutions.co.uk
Just note, you will have zero throw, it's rock hard/gets some getting use to
The rubber recently deteriorated, so I got a replacement M4 screw with new rubber from rs components and screwed it in a higher position.
Upvote
0
Thanks.T3PA Load Cell Brake Mod - Sim Racing Solutions - Oxfordshire UK
Upgrade your T3PA pedals today! Sim Racing Solutions Load cell brake mod. For Pro and Non Pro pedal sets. Short throw shifter kits for TH8A & TH8RS.
Just note, you will have zero throw, it's rock hard/gets some getting use to
The rubber recently deteriorated, so I got a replacement M4 screw with new rubber from rs components and screwed it in a higher position.
I had CSR Elite, Clubsport V2 and Clubsport V3 pedals, so I know how they feel already. I am still sad that I had to sell my V3's, but such is life.
I will look at the link.
Upvote
0
Butthurt_Saddle_sore
Premium
I have serious concerns as to where the pedal arms are hinged at. I'm thinking they will press towards the floor.
Upvote
0
To me they look really cheap/toyish. I would love thrustmaster to step their game up and make some real alternative for v3s. But what I really hope for is lower budget DD wheel by them
Upvote
0
T3PA Load Cell Brake Mod - Sim Racing Solutions - Oxfordshire UK
Upgrade your T3PA pedals today! Sim Racing Solutions Load cell brake mod. For Pro and Non Pro pedal sets. Short throw shifter kits for TH8A & TH8RS.
Just note, you will have zero throw, it's rock hard/gets some getting use to
Strange. I have that mod from Sim Racing Solutions (bought in October 2019 for my T3PA, non-pro) and I get about 3.5cm of pedal movement at the top of the pedal. That was why I picked that particular mod.
Upvote
0
A few other reviews have been published.
The reviews are pretty positive on the brake load cell and its adjustability, all be it not quite as stiff as some ideally like it.
The reviews are pretty positive on the brake load cell and its adjustability, all be it not quite as stiff as some ideally like it.
Last edited:
Upvote
0
There is definitely a need for a T-LCM PRO fully metal version.
Upvote
0
You don’t need the USB dongle for the pedals as far as I’m aware I certainly didn’t for the V3’s.
Also where are you getting your prices from?! The V3’s are like €400 including postage to UK and the CSL elite which are a step up on the Thrustmaster pros are only around €250.
Personally I’d go up to CSL Elites before then looking at some proper pedals like the Heusinkveld Sprints, Protosimtech PT-2 etc.
Upvote
0
