v0.8.24 is out.
Expected problems:
- Carlswood's kerbs seem to have a problem with bumpmapping. They're using static bumpmapping which haven't changed yet (to world space). Might be the tangent creation, hm.
Get it at: http://www.racer.nl/download/racer0.8.24.zip
Changes:
- dyn_standard_bump_reflect_*.cg rewritten to work in world space. Faster & reflection
is now also affected by the normal map (quite noticable).
- Same for dyn_standard_bump_*.cg; it now also takes the bumpmap's alpha for reflectiveness (specular).
- dyn_standard_bump_speca_v/f_cg was removed; use dyn_standard_bump_reflect*.cg instead (which does
the same thing).
- Controller stick_friction threshold velocity decreased from 20 m/s to 5 m/s (hardcoded).
- Added 'u' to position logging (normalized lateral position on the track)
- Added projected lights intensity: car.ini's lights.light<n>.color (default=4 4 4). In klux. Check
the Lambo's car.ini.
- async now runs the physics thread full throttle; it must run on a separate core if you want to avoid
it impact the other threads.
- TrackEd reworked to use the full render engine. Flashing also works again. Stack overflow fixed.
- Wheel setup screen now includes friction/stick friction/damping/inertia sliders.
- Added car.ini car.ff_friction, ff_stickfriction, ff_damping and ff_inertia factors to tune force feedback.
- Also added car.ini car.ff_gain, which modifies the ff_friction etc values directly (default=1.0)
- Added console commands 'ff friction <x>', 'ff stickfriction <x>', 'ff damping <x>' and 'ff inertia <x>'
for live setting of FF values. Absolute numbers for the controller, not car relative (0..10000).
- Fixed typo in NightSaturate() (no green in B&W color) in hdr.cg
- Tangents now generated in 4 coordinates (was 3). Mirrored UV seams are now being duplicated
to avoid tangent trouble where UV and mirrored UV parts meet.
- Modeler can now show tangents (T to toggle). It already did normals (N to toggle).
- Tangents were never used as VBO's; now they are (slightly faster).
Expected problems:
- Carlswood's kerbs seem to have a problem with bumpmapping. They're using static bumpmapping which haven't changed yet (to world space). Might be the tangent creation, hm.
Get it at: http://www.racer.nl/download/racer0.8.24.zip
Changes:
- dyn_standard_bump_reflect_*.cg rewritten to work in world space. Faster & reflection
is now also affected by the normal map (quite noticable).
- Same for dyn_standard_bump_*.cg; it now also takes the bumpmap's alpha for reflectiveness (specular).
- dyn_standard_bump_speca_v/f_cg was removed; use dyn_standard_bump_reflect*.cg instead (which does
the same thing).
- Controller stick_friction threshold velocity decreased from 20 m/s to 5 m/s (hardcoded).
- Added 'u' to position logging (normalized lateral position on the track)
- Added projected lights intensity: car.ini's lights.light<n>.color (default=4 4 4). In klux. Check
the Lambo's car.ini.
- async now runs the physics thread full throttle; it must run on a separate core if you want to avoid
it impact the other threads.
- TrackEd reworked to use the full render engine. Flashing also works again. Stack overflow fixed.
- Wheel setup screen now includes friction/stick friction/damping/inertia sliders.
- Added car.ini car.ff_friction, ff_stickfriction, ff_damping and ff_inertia factors to tune force feedback.
- Also added car.ini car.ff_gain, which modifies the ff_friction etc values directly (default=1.0)
- Added console commands 'ff friction <x>', 'ff stickfriction <x>', 'ff damping <x>' and 'ff inertia <x>'
for live setting of FF values. Absolute numbers for the controller, not car relative (0..10000).
- Fixed typo in NightSaturate() (no green in B&W color) in hdr.cg
- Tangents now generated in 4 coordinates (was 3). Mirrored UV seams are now being duplicated
to avoid tangent trouble where UV and mirrored UV parts meet.
- Modeler can now show tangents (T to toggle). It already did normals (N to toggle).
- Tangents were never used as VBO's; now they are (slightly faster).