Simhub 7 shaker setup. Help needed.

[Smessiah]

Hello guys I have been following alot of your work with bass shakers and its super impressive. I started with a ps4 and a single buttkicker kit and then found this forum...


This is what I am using now

Trak racer 180 aluminum profile rig

Amps
Behinger nx1000d (dsp)

Buttkicker BKA-130-C

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.parts-express.com/ButtKicker-BKA-130-C-90W-Power-Amplifier-300-9420&ved=2ahUKEwiy-oCH-On5AhWhLEQIHU_NCVcQFnoECD0QAQ&usg=AOvVaw1tVO-h1zJdu-Nu3-ZZem2P

Dayton BSA-200

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.daytonaudio.com/product/1609/bsa-200-200w-bass-shaker-bridgeable-stereo-amplifier-with-remote&ved=2ahUKEwiy_emm-On5AhWtLUQIHSE5Bz0QFnoECBgQAQ&usg=AOvVaw2a0C2bnPp3LcS8bR3KeXNP

Moukey Audio Amplifier 2 Channel​

https://www.amazon.com/gp/aw/d/B09136681Q?psc=1&ref=ppx_pop_mob_b_asin_title

shakers
1 Buttkicker advanced
1 buttkicker mini lfe
3 Dayton bs 1
2 Dayton bs2
1 buttkicker mini concert (not using this right now)
2 of the dayton pucks im not using as of right now

sound card's
5.1 creative
5.1 asus sonar

Misc/Console stuff I have
behringer mini eq
Behinger 2 channel 15 band eq
Dayton dsp mini

so I bought all this as upgrades to a console setup. Now im on pc and am a little lost as to what to use/how to set it up for sim hub.
My current configuration is this

mini lfe and dayton bs1 under the pedals on one channel of the 1000 nxd amp and the advanced on the other channel both under my seat as a center channel
2 Dayton bs2 shakers on the front corners, on the moukey amp. Front channel
2 Dayton bs1 on the rear corners on the dayton amp rear channel.

All on the creative sound blaster 5.1

If you read all of that thank you so much, I have quite a few questions but the major one is how wrong is My setup?
How would you set it up?

Thank you a ton.