Shannon Flynn
When in doubt, pass out.
HI
After all of these years, I still stink at setting up vehicles. Not my thing, as I'm far from mechanically inclined.
I can usually fiddle around enough to get by and be competitive, but Zolder is baffling me!
My problem here is the bumpiness of the course. Can it be tuned out to a reasonable level?
I've softened the sway bars, springs and dampers, and raised the ride height as to not bottom out. But I'm still bouncing all over the place.
Is there anything I should take into consideration other than what I've mentioned above?
For the record, I LOVE the surface at Zolder. I just don't want to put myself at a disadvantage.
Any suggestions would be much appreciated!
After all of these years, I still stink at setting up vehicles. Not my thing, as I'm far from mechanically inclined.
I can usually fiddle around enough to get by and be competitive, but Zolder is baffling me!
My problem here is the bumpiness of the course. Can it be tuned out to a reasonable level?
I've softened the sway bars, springs and dampers, and raised the ride height as to not bottom out. But I'm still bouncing all over the place.
Is there anything I should take into consideration other than what I've mentioned above?
For the record, I LOVE the surface at Zolder. I just don't want to put myself at a disadvantage.
Any suggestions would be much appreciated!
![Luca [OT]](/data/avatars/s/3235/3235113.jpg?1697196734){kind=avatar}