New 9.3 version.
Notable updates
- Added 'Driver DNA' back to the tool
- ACC
- Shared memory data and broadcast updated to the latest version
- Saving of opponent laps during races added
- Tool game-mode can be set from command-line, no more need to set the game via settings, makes life much easier
- Many performance fixes/optimizations
- A lot of PC2 related fixes/improvements
- Fixes to many tracks
- Added new "vs. me" graph to Race History
- Put F1 2018...
Iko Rein updated Telemetry Application with a new update entry:
Telemetry Application
Read the rest of this update entry...
Just a version, where there is an updated ACC_SharedMemory_Relay.exe, which doesn't get flagged by bitdefender and some other virus scanners preventing installation.
Nothing else has changed. So if you have the tool up and running, no need to update. If you are downloading an update for pre 9.3 version, get this "b" install.
If you are using ACC and the ACC_SharedMemory_Relay.exe in your current install gets flagged for virus, get the ACC_SharedMemory_Relay.exe from the "b" packet.
The...
Just a version, which includes an updated ACC_SharedMemory_Relay.exe, which doesn't get flagged by bitdefender and/or other virus scanners preventing installation, and which doesn't require extra .dlls.
Nothing else has changed. So if you have the tool up and running, no need to update. If you are downloading an update for pre 9.3 version, get this "c" install.
If you are using ACC and the ACC_SharedMemory_Relay.exe in your current install gets flagged for virus, get the...
ive tried everything from reinstalling windows to rebuilding all dlls on my system, when i run runWin_4GB_memory_limit.bat or ANY of the variations i get the following errors.... any insight on this please?
@Iko Rein How do i get my xbox to send the data over? My PC version of the game works but Xbox doesnt even show the dot even after i've completed a few laps. How can I fix this?
Also, I think you accept small contributions (eg PayPal) right? I cannot find how to do it, can you let me know please? FYI it will be only $10 for a beer or two, but in the future I may do more, I love your sh.t man!
P.S. I was looking for it in the overview here: https://www.racedepartment.com/downloads/telemetry-application.27456/
Maybe you can put the paypal link there so other people can do it too.
hello, first of all i wanna say a great thanks for your job and make it free for all! really appreciated!
after some basic test, i have encountered some problems with f1 2019 on XBOX.
i'm able to run the tool from Workstation and get data from XBOX but after some races (one, 2 or 3) i always get the telemetry tool completely frezzed with CPU at 100%. wait many minutes but nothing changed. i've tried to disable some settings but it keeps hanging.
my doubt is that i forward 20777 port from simhub software (i use also a special dashboard) so i get data from f1 2019 on 20778 and simhub forwards it to 20777 for telemetry. of course both on the same ip address.
ive tried to lunch temetry from a bat file for 2Gb ram (of 4 gb on my workstation)...better but not ok. can i try anything else?
last question, is there a way to autosave my telemetry data when recorded for each circuit?
thanks a lot!
Hmm, running out of juice on a laptop is always a possible issue.
So to run a "minimal setup", you do this:
1) start the tool to Race Info tab and don't change it (full Telemetry gets saved and you can view it, when you are not using the live data. Race Info is the least resource hungry tab to keep open.
2) set CPU limit to minimum and
3) set DELTA accuracy to minimum and
4) set Blue Lap to 'non lap'. With this you could experiment, if turning the blue lap off helps.
This way you should be able to run the tool under 500MB easily and go even to about 250MB with the memory limit. This would be good for 5 lap online racing activity. Below the 250MB you will hit 'out of memory errors'. If you want bit faster updates, you can set the CPU on faster level. It will not take much memory, but will make the Telemetry tool's update cycle frequency higher.
For the last question, can you elaborate bit more, what you want to do?
Cheers.
PS. On a different note, I have been working on performance tuning/optimizations for the next version to accommodate the large variety of the platforms, where the Telemetry tool is being used. There is no ETA for the new version though.
@Iko Rein Automobilista 2 (AMS2) is using the same engine as PCARS 2 and has UDP output. The driving screen is receiving data from the game but the live traces do not see to be showing up and there are no saved files. Have you tried AMS2 with this telemetry software?
ok i've ran telemetry with settings you described and seems to be better. it hanged only one when switch from "race info" to "telemetry". retried with game closed and it worked perfectly. in this way the tool take about 1,5gb of ram...really high...but it works and this is must important.
i will keep you updated if i find any other issues.
thanks a lot!