Misc URD JT5 Shiro Physics Update (Nissan GT-R NISMO GT500) 2.3

[GianmarcoFiduci]

bastoner97 submitted a new resource:

URD JT6 Shiro Physics Update (Nissan GT-R NISMO GT500) - Physics update for this great car

In my opinion this car lacks a lot of grip, it slides all around the track and it's really the opposite if you compare how the real SGT cars behave on track, they have tons of grip.
I tried to fix this problem, now the car has a lot of grip, in Suzuka, with the Qualifying tire, you can do 1.45s, really close to this year's Pole Position.
I hope you like it!

Installation: Drop the data folder into the urd_jt5_2016_shiro_r1/2/3 folder and delete the data.acd file....

Read more about this resource...

 

[Tomcul]

Ver 3 tyres though??

 

[GianmarcoFiduci]

Ver 3 tyres though??

Yeah I must update it, sorry for that

 

[Mitja Bonca]

Finally that someone is trying to fix this unaccomplished physics of this great car.
Try at Okayama, which is the only sure comparison. I must do 1.18, but no more and no less
Or Fuji as well, I think 1.27 is RL record.
Will try it to, later.

 

[Mitja Bonca]

Btw, can you change this ugly "JT5" logo inside brands folder? So it will be under Nissan or something?

 

[GianmarcoFiduci]

Finally that someone is trying to fix this unaccomplished physics of this great car.
Try at Okayama, which is the only sure comparison. I must do 1.18, but no more and no less
Or Fuji as well, I think 1.27 is RL record.
Will try it to, later.

Yeah I'm updating the car to V10 tyres, I'm using Okayama as my test track, I have to find the right balance between car downforce and tyres performance.

 

[Mitja Bonca]

Did few laps around Okayama, with mediums a high 1.18, and 1.17.8 with qually tires (still some room for improvements).
I thinks the tires grip just a tad too much on qually tires (and maybe on mediums too, didn`t try hard compounds). Physics feels fine, a bit lack of FFB, top speed seems fine too. Heres the video of a lap:

 

[Mitja Bonca]

Fuji speedway with v2 physics (still WIP):

 

[GianmarcoFiduci]

bastoner97 updated URD JT6 Shiro Physics Update (Nissan GT-R NISMO GT500) with a new update entry:

Improved physics

Added:
-V10 tyres
- New fuel Consumption
- New Downforce levels
- Right name when loading the car
- Little improvement on the FFB

Thanks to Mitja Bonca for the feedback on the mod!

Read the rest of this update entry...

 

[GianmarcoFiduci]

bastoner97 updated URD JT6 Shiro Physics Update (Nissan GT-R NISMO GT500) with a new update entry:

Fixed Quali Tyres

Sorry for this double update, I've fixed the problem with Qualy tyres, the went way too hot

Read the rest of this update entry...

 

[Apexxer]

Delete

 

[Apexxer]

Delete

 

[Recensored]

I'm not sure if I've done something wrong installing or what but I'm getting over 100 laps for 25L fuel. Other than that, loving the extra grip =] thanks for your work.

 

[GianmarcoFiduci]

I'm not sure if I've done something wrong installing or what but I'm getting over 100 laps for 25L fuel. Other than that, loving the extra grip =] thanks for your work.

Do you have the fuel consumption on? It sounds strange

 

[Recensored]

Fuel consumption is set to x1 in content manager, I will try downloading a fresh version of the urd mod and yours to double check.

 

[Recensored]

Just did fresh installs on both mods, stock URD mod gets 6.2 lap estimate after 5 laps running. With your mod I get 113 lap estimate after the same running. Both tests on Road Atlanta with 25L of fuel and same setup.

 

[GianmarcoFiduci]

Just did fresh installs on both mods, stock URD mod gets 6.2 lap estimate after 5 laps running. With your mod I get 113 lap estimate after the same running. Both tests on Road Atlanta with 25L of fuel and same setup.

LOL Seems like I have to change something ahahaha

 

[Recensored]

still loving the mod btw, in case I'm sounding like a whiner in some of my first posts on this site. Just trying to help out =]

 

[GianmarcoFiduci]

still loving the mod btw, in case I'm sounding like a whiner in some of my first posts on this site. Just trying to help out =]

No problem mate, I know you’re trying to help, I appreciate it, and I’m also very happy that people is liking this mod

 

[Mitja Bonca]

I have fixed all the issues regarding physics (fuel consumption (now is exactly as it shoild be), tire heating, and some stuff regarding suspension), I can sand you @bastoner97 , do you can upload here.
Btw, me and URD team ( this car creators) are making a complete new physics for this car from scratch, and so far we are on 50%, and looks good.