Hello all,
I have recently just converted from using a nextion 4.3" display to a Vocore display for my race data feed. I designed and printed my own housing which is compatible with Fanatec devices. I figured I would share these with anyone interested in using them. They have been designed to use 4 - M3x4x5mm threaded inserts on the front plate and has 4 - M3x12mm screws hold the enclosure together from the back.
I have recently just converted from using a nextion 4.3" display to a Vocore display for my race data feed. I designed and printed my own housing which is compatible with Fanatec devices. I figured I would share these with anyone interested in using them. They have been designed to use 4 - M3x4x5mm threaded inserts on the front plate and has 4 - M3x12mm screws hold the enclosure together from the back.
Attachments
-
Vocore DDU Front Plate.stl25.5 KB · Views: 170
-
Vocore DDU Backplate.stl65.1 KB · Views: 119
-
Vocore DDU Cable Clips.stl47.2 KB · Views: 124
-
Vocore_Front_Plate.jpg727.3 KB · Views: 319
-
Vocore_Assembled.jpg382.3 KB · Views: 266
-
Vocore_Mounted_W_Cable_Clips.jpg221.6 KB · Views: 374
-
F1_2020_Test.jpg219.5 KB · Views: 353
Last edited: