Ai ignoring [DANGER_X] instructions from ai_hints.ini

[Gunja]

MAXSPEED is the only thing they obey.
Danger and Hint does nothing to them, they still overtake on the part where i tell them not to.
Here are specific instructions from my hints file:

[MAXSPEED_0]
START=0.090400
END=0.174400
VALUE=230
This makes them go 230 on that part and it works

[DANGER_0]
START=0.090400
END=0.174400
LEFT=1
RIGHT=0
This tells them not to overtake to the left on the same part but they still do it

Is it something they can ignore if they "think" it's safe to go or do i do it wrong?

 

[Ryno917]

MAXSPEED is the only thing they obey.
Danger and Hint does nothing to them, they still overtake on the part where i tell them not to.
Here are specific instructions from my hints file:

[MAXSPEED_0]
START=0.090400
END=0.174400
VALUE=230
This makes them go 230 on that part and it works

[DANGER_0]
START=0.090400
END=0.174400
LEFT=1
RIGHT=0
This tells them not to overtake to the left on the same part but they still do it

Is it something they can ignore if they "think" it's safe to go or do i do it wrong?

You could try bringing in the track boundaries in that area to narrow the path enough that they don't think they can fit two-wide?

Not sure about the AI ignoring stuff in the Hints file, I've got the same issue right now.

 

[Gunja]

It's a part with two lanes, so making narrow boundaries would mess up the path for the ones in the other lane.