Tracks Black Cat County Re-Texture v1.1

[ClimaxF1]

ClimaxF1 submitted a new resource:

Black Cat County Re-Texture - Green Spring version

Hi Guys

I always wondered how Black Cat County would look like with green hills and I have to admit, I really like it a lot.

Hope you guys like the re-texture, have fun

N.B. Select Black Cat County CF1 skin in Content Manager

Update details v1.0:

- All road side, hills and mountains re-textured (Green/Spring)
- Removed all dry and thorn bushes, replaced with green bushes
- Reworked Cactus
- New Billboards
- Reworked Billboard stands, different color too
-...

Read more about this resource...

 

[mtjam]

Hi, looks great but I can't install it. It doesn't just drag and drop and when I put it in the skins folder manually still nothing. I must be doing something wrong.
cheers

 

[ClimaxF1]

Hi, looks great but I can't install it. It doesn't just drag and drop and when I put it in the skins folder manually still nothing. I must be doing something wrong.
cheers

You need content manager to select skins, otherwise drop all the textures and place them in Black Cat County skins/default folder.

 

[mtjam]

You need content manager to select skins, otherwise drop all the textures and place them in Black Cat County skins/default folder.

I tried that too and still nothing. Thanks for the reply though.

 

[ClimaxF1]

I tried that too and still nothing. Thanks for the reply though.

It should work if textures are placed in the default folder.

 

[ClimaxF1]

ClimaxF1 updated Black Cat County Re-Texture with a new update entry:

Missing textures added

Hi Guys

For some reason the water texture was not included, then I replaced yellow black cat sign with a hill decline one.

Read the rest of this update entry...

 

[mtjam]

It should work if textures are placed in the default folder.

Got it. Done, cheers

 

[GIRAUD Didier]

ClimaxF1 a soumis une nouvelle ressource :

Re-Texture du comté de Black Cat - Version Green Spring



En savoir plus sur cette ressource...

 

[GIRAUD Didier]

Téléchargé , installé et puis ... rien , pas de changement ! Pourquoi ?

 

[ClimaxF1]

Téléchargé , installé et puis ... rien , pas de changement ! Pourquoi ?

Are you using content manager to select skins?

 

[ClimaxF1]

Hi Guys

With this re-texture for Black Cat County, I would love to see some air balloons.

Tried adding from various other tracks and they look really nice, problem is after extracting the textures, they don't load. Tried placing the new textures in the skins folder and nothing.

New track textures are fine, they always load, but not the air balloons. Is this because they from a different kn5 file, too be honest I have no clue.

If someone could help me with this would be awesome. Otherwise if anyone wants to do them would be very much appreciated.

Air balloons must look natural, no race logos, or petrol, oil, basically anything motorsport.

Look forward to any comments, thank you!

 

[pete82]

I think green hills should use grassFX?

 

[ClimaxF1]

ClimaxF1 updated Black Cat County Re-Texture with a new update entry:

GRASS_FX added

Hi there

Forgot how good this track is to race

Update details v1.1:

- GRASS_FX added

View attachment 748039View attachment 748040

Read the rest of this update entry...

 

[Vintagedriver01]

Those advertisement changed to old rusty advertising boards that also contain wear caused by the sun and sand storms, would be great addition.

 

[Leglaude]

Hello !

First thanks a lot for your mods, they are fantastic

But on this map I got some graphic clipping (line of the middle of the road / curbs) : it's clean just front of the car but there is some "blur" 15 meters away, and it's becoming "clear" as the car moving moving forward.

And some billboard are invisible and appear tardily.

My graphics settings are good (details and fps) for other tracks (with or without your mods), so I prefer ask you the question : do you see what can be the issue ?

MSI laptop ; RTX 2060 6go ; Intel Core i5-10300H ; 16g DDR4
CM 0.8.2663.39678 ; CSP 0.2.3 ; PPfliter _PureLIFE

Thank you, have a good day

 

[ClimaxF1]

Hello !

First thanks a lot for your mods, they are fantastic

But on this map I got some graphic clipping (line of the middle of the road / curbs) : it's clean just front of the car but there is some "blur" 15 meters away, and it's becoming "clear" as the car moving moving forward.

And some billboard are invisible and appear tardily.

My graphics settings are good (details and fps) for other tracks (with or without your mods), so I prefer ask you the question : do you see what can be the issue ?

MSI laptop ; RTX 2060 6go ; Intel Core i5-10300H ; 16g DDR4
CM 0.8.2663.39678 ; CSP 0.2.3 ; PPfliter _PureLIFE

Thank you, have a good day

Will have a look now, will use same filter and other settings as you

 

[ClimaxF1]

Hello !

First thanks a lot for your mods, they are fantastic

But on this map I got some graphic clipping (line of the middle of the road / curbs) : it's clean just front of the car but there is some "blur" 15 meters away, and it's becoming "clear" as the car moving moving forward.

And some billboard are invisible and appear tardily.

My graphics settings are good (details and fps) for other tracks (with or without your mods), so I prefer ask you the question : do you see what can be the issue ?

MSI laptop ; RTX 2060 6go ; Intel Core i5-10300H ; 16g DDR4
CM 0.8.2663.39678 ; CSP 0.2.3 ; PPfliter _PureLIFE

Thank you, have a good day

Strange, had similiar problems with same filter (PureLIFE) when starting, none of my billboards loaded, intead the default one's.

Reloaded track and was fine.

Don't think it's a filter problem but more of a CSP Pure thing, there are unfortunately some bugs with certain tracks.

Just my thoughts but could be very wrong.

Have noticed a few bugs with CSP 0.2.3 but it's still the best version for me, especially with my track updates.

Normally reloading track solves problem or better, you can press ctrl + O to reset track ingame which normally sovles any bugs and AI issues for all tracks.

I do recommend using PureLIFE Evo (good filter when tracks have lots of bright textures) for this track or standard Pure by Peter Boese to get the best colors from this update

 

[Leglaude]

Strange, had similiar problems with same filter (PureLIFE) when starting, none of my billboards loaded, intead the default one's.

Reloaded track and was fine.

Don't think it's a filter problem but more of a CSP Pure thing, there are unfortunately some bugs with certain tracks.

Just my thoughts but could be very wrong.

Have noticed a few bugs with CSP 0.2.3 but it's still the best version for me, especially with my track updates.

Normally reloading track solves problem or better, you can press ctrl + O to reset track ingame which normally sovles any bugs and AI issues for all tracks.

I do recommend using PureLIFE Evo (good filter when tracks have lots of bright textures) for this track or standard Pure by Peter Boese to get the best colors from this update

Ok,

I forgot to tell, I don't have pure, I'm using SOL 2.2.9 ; the ppfilters are the "pure for SOL" version.

Anyway I've tried without ppfilter / and with PureLIFE Evo (best colors indeed), it doesn't solve the bug.

Is "ctrl + O to reset track ingame" = escape and restart session ?
--> I've restarted session by escape menu, but not by this way (don't have that entry in controls settings). No change.
--> if that's different / important to do that way, can you tell me what entry I have to fill ? (restart race, restart session...)

Thanks

 

[alexlockout]

Hello !

First thanks a lot for your mods, they are fantastic

But on this map I got some graphic clipping (line of the middle of the road / curbs) : it's clean just front of the car but there is some "blur" 15 meters away, and it's becoming "clear" as the car moving moving forward.

And some billboard are invisible and appear tardily.

My graphics settings are good (details and fps) for other tracks (with or without your mods), so I prefer ask you the question : do you see what can be the issue ?

MSI laptop ; RTX 2060 6go ; Intel Core i5-10300H ; 16g DDR4
CM 0.8.2663.39678 ; CSP 0.2.3 ; PPfliter _PureLIFE

Thank you, have a good day

check the anisotropic filtering settings, I once had them accidentally reset to 0, and had the same problem on some tracks. for the test set it to 16 and check.

 

[ClimaxF1]

Ok,

I forgot to tell, I don't have pure, I'm using SOL 2.2.9 ; the ppfilters are the "pure for SOL" version.

Anyway I've tried without ppfilter / and with PureLIFE Evo (best colors indeed), it doesn't solve the bug.

Is "ctrl + O to reset track ingame" = escape and restart session ?
--> I've restarted session by escape menu, but not by this way (don't have that entry in controls settings). No change.
--> if that's different / important to do that way, can you tell me what entry I have to fill ? (restart race, restart session...)

Thanks

Sent private message