Apps Download removed [Deleted]

[Rigle1818]

Will you be adding support for V Rally 4 if it has telemetry data available?

 

[Wotever]

Will you be adding support for V Rally 4 if it has telemetry data available?

Sadly there is no telemetry, I've bought it and tried to see if there were some undocumented entry points but I couldn't find anything

 

[Wotever]

Any known reason why Windows Defender go "bananas" and take a few minutes to
verify the zip and also when I extract the install the install package from the zip?

View attachment 272441

I don't get any error/warning but the verify process takes several minutes, same behavior on both my computers, same with previous versions.

It's a quite difficult issue to solve, simhub contains lot of small files and it takes time to scan, I guess the solution would be to split it in multiple installers to allow a more modular installation. But as is there is not much solutions, it's a windows defender behaviour on which I don't have any influence

 

[oShockwave]

So I discovered that there's in option to have the window always stay on top so I've decided to run it and just have it overlay instead of on my phone but now I've found a new issue. When I choose to run the dash on it's own, windowed, it's not receiving the telemetry from F1 2018, but if I do it on my browser, it does receive it, but I'm not able to keep my browser overlayed on the game.

edit: Apparently it's only some of the dashes that are only working in the browser. Neither of the AIM or the Audi worked, but the Ferrari one did.

 

[Wotever]

So I discovered that there's in option to have the window always stay on top so I've decided to run it and just have it overlay instead of on my phone but now I've found a new issue. When I choose to run the dash on it's own, windowed, it's not receiving the telemetry from F1 2018, but if I do it on my browser, it does receive it, but I'm not able to keep my browser overlayed on the game.

I've got a couple of reports about this, I've tested multiple times without reproducing it. I guess it's a f12018 issue (and there are a lot about telemetry) I will test again but I think that it would be interesting to open the case on codies forums

 

[grzegorzg]

Is it possible to install a 8-digit LCD display (8x74HC595) using Sketch Setup
https://botland.com.pl/11040-thickbox_default/modul-8-x-wyswietlacz-8-segmentowy-spi.jpg
https://botland.com.pl/11041-thickbox_default/modul-8-x-wyswietlacz-8-segmentowy-spi.jpg
I tried to upload, but the LCD displays strange unintelligible characters.
I will add that I have no experience in programming Arduino.
My Arduino is Nano v3.0 CH340

I would like to set the display on this display to indicate the speed, the speed at which I travel and the distance traveled.

 

[Wotever]

Is it possible to install a 8-digit LCD display (8x74HC595) using Sketch Setup
https://botland.com.pl/11040-thickbox_default/modul-8-x-wyswietlacz-8-segmentowy-spi.jpg
https://botland.com.pl/11041-thickbox_default/modul-8-x-wyswietlacz-8-segmentowy-spi.jpg
I tried to upload, but the LCD displays strange unintelligible characters.
I will add that I have no experience in programming Arduino.
My Arduino is Nano v3.0 CH340

I would like to set the display on this display to indicate the speed, the speed at which I travel and the distance traveled.

It's not supported I'm affraid, for this from factor you will find Tm1638 and max7218/21 : https://github.com/zegreatclan/AssettoCorsaTools/wiki#arduino-support
74HC595 stock support is only for a single digit gear indicator.

 

[Rigle1818]

Sadly there is no telemetry, I've bought it and tried to see if there were some undocumented entry points but I couldn't find anything

Thats disappointing. The game isn't that bad and has some potential. But I hate using the on screen HUD to see what gear I'm in.

 

[Wotever]

Wotever updated SimHub, DIY Sim racing Dash with a new update entry:

6.5.6 - Hotfix

Hi !

Little hotfix following the yesterday update :
- Iracing was detecting a double lap when crossing the line
- RRRE invalid lap detection was still not satisfying
- Added RGB encoding setting to arduino to cover more WS218B let types variations.

Have fun !

Read the rest of this update entry...

 

[DaimodICE]

Please tell me how can I update the sim hub? Should I download again? and pay again? help please - thanks!

 

[Wotever]

Please tell me how can I update the sim hub? Should I download again? and pay again? help please - thanks!

Obviously not, donator edition is permanent to update to just have to download the new version and install it over, it will keep all your settings etc.

 

[DaimodICE]

Obviously not, donator edition is permanent to update to just have to download the new version and install it over, it will keep all your settings etc.

Sorry, but I did not quite understand (should I download this version from the site? If so, should I just download and unpack by default? And my license will not be lost?

 

[Hephaistos]

@DaimodICE You are right.
Download the new version and install it. Your license and settings are still valid.

 

[DaimodICE]

Are you planning to support Forza horizon 4?

 

[Wotever]

Are you planning to support Forza horizon 4?

There is no telemetry exposed in FH4 sadly.

 

[Hephaistos]

Dakar 18 has too no telemetry data, right?

 

[Wotever]

Dakar 18 has too no telemetry data, right?

I've not found any clue about telemetry neither . Yeah I know it's a shame I don't know why all the games studio doesn't invests a few hours into adding a telemetry out interface. It can be quite frustrating. My biggest miss is wreckfest. I would love so much to get my bass shakers and dash alive on this one

 

[Hephaistos]

@Wotever
I agree. I would too to use SimHub (BassShaker, Pedal Vibrators) with wreckfest and all my other games. It would be great if the Devs implent telemetry data... :/

A side question:
Is it possible to attach a LED (surely with a resistor) on the Arduino Motor Shield to show (i.e.) if the Hazard Lights are active in ETS2?
I've not found infos about something like this.

Thank you

 

[Wotever]

@Wotever
I agree. I would too to use SimHub (BassShaker, Pedal Vibrators) with wreckfest and all my other games. It would be great if the Devs implent telemetry data... :/

A side question:
Is it possible to attach a LED (surely with a resistor) on the Arduino Motor Shield to show (i.e.) if the Hazard Lights are active in ETS2?
I've not found infos about something like this.

Thank you

Not basic LEDs, as it's not really expendable in my opinion, but ws2812 are supported by simhub and comes in various form factors including single led : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Arduino-WS2812b-RGBLEDS--Wiring-Setup

 

[Hephaistos]

Not basic LEDs, as it's not really expendable in my opinion, but ws2812 are supported by simhub and comes in various form factors including single led : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Arduino-WS2812b-RGBLEDS--Wiring-Setup

Thank you for your info and link.
So I will buy WS2812 LEDs. But I have too look how to "read" the data (i.e. hazard lights) from the game.