Skins Formula Hybrid 2018 | Renault RS18 2018 2018-04-01

[Marco17_ok]

Marco17_ok submitted a new resource:

Formula Hybrid 2018 | Renault RS18 2018 - Formula Hybrid 2018 | Renault RS18 2018

Formula Hybrid 2018 | Renault RS18 2018​

If you have problems report them here.
Tyres by @formulaHEINE
Buy the car here: http://racesimstudio.com/shop
or here: http://www.racedepartment.com/downloads/rss-formula-hybrid-2018.20290/
View attachment 244291

Read more about this resource...

 

[Amir Vodokotlic]

So you didn't bother saying in rss 2018 thread you were doing Renault skin. So i don't bother doing one.

but anyways
......................

Color is not correct.

your skin

real car

 

[asehauDLM]

As always, here's my feedback!

1. As you already mentioned in the review section: The yellow should be a little darker. But you'll get it right, if you can find the perfect Papaya Mclaren orange you can find the correct Renault yellow.

2. More importantly: I think the black parts of the skin are clearly not black enough, they look more like a very dark grey with a little red mixed into it.
The picture from Amir is the perfect example. All black parts that are not carbon are completely black, darkest black you can get.
When the sun isn't shining directly onto the black parts it looks fine but when the sun shines on it directly you really notice that the black parts aren't dark enough.
And Amir's picture shows that the black parts are really dark black, even when the sun is shining on the car.

3. There's a Microsoft logo on the bargeboard.
http://www.racedepartment.com/attachments/racefansdotnet-20180324-043750-25-jpg.244231/

4. I think the outer top frontwing elements should be black instead of yellow.

https://i.imgur.com/sXBpVQk.jpg
https://www.racefans.net/2018/03/25...-grand-prix-race-day-melbourne-australia-338/
https://www.racefans.net/2018/03/25...-grand-prix-race-day-melbourne-australia-342/

5. The lines on the front of the chassis are quite pixelated, maybe it's possible to make them a bit smoother?


6. Lines on the engine cover are also pixelated.


7. There's a little texture bug on the side of the car, a little yellow triangle that actually should be black.


8. Final thing. I think the area around the sidepod entries needs to be painted a bit differently.


http://www.racedepartment.com/attachments/racefansdotnet-20180324-043750-25-jpg.244231/
https://www.racefans.net/2018/03/25...-grand-prix-race-day-melbourne-australia-338/
https://www.racefans.net/2018/03/25...-grand-prix-race-day-melbourne-australia-365/

Especially those three pictures below show you how it should be. There still needs to be black bodywork between the yellow stripe and the carbon parts from the floor of the car so if you edit it the way I did it should be perfect!

https://www.racefans.net/2018/03/23...nd-prix-practice-day-melbourne-australia-460/
https://www.racefans.net/2018/03/25...-grand-prix-race-day-melbourne-australia-342/
https://www.racefans.net/2018/03/24...-prix-qualifying-day-melbourne-australia-199/

Just noticed: In the preview picture Hülkenberg also has a yellow T-cam, ingame it's fine though.

 

[blackcelica]

V3.0 of the car has been released now. Your halo shows unpainted, it alters the rims and the camera box on the top.