SO you want to have setup options like that Ginetta, or is that your R34 and you're using the Ginetta model as placeholder?
In general, with a few exceptions, you can add anything from the ini files to the the setup.ini. Are you tinkering on the r34 physics via edit to the suspension.ini or do you tweak only in the setup screen? The setup.ini will overrule settings you do to the other ini's (like Springrate and Damperrate) if the values you added in the suspension.ini are outside the range of the setup.ini
So best option is to clear out the setup.ini, tweak the car via the ini files, and fill in the setup.ini as the last step after everything else is done.
well I've used screenshot of Ginetta to show what i mean, I thought that if I can use options from Setup.ini I could get rewarding result of Suspension
Wait Setup.ini has more importance for a game than Suspension.ini ?
i tried so many times to setup Suspension of R34 however all the time car is strange to drive, tried to use values of similar AWD cars like Audi R8 - no luck,
my problem lies in the lack of knowledge i have no idea how to setup those values...
BUMP_STOP_RATE=100000 ; bump stop spring rate
BUMPSTOP_UP=0.075 ; meters to upper bumpstop from the 0 design of the suspension
BUMPSTOP_DN=0.060 ; meters to bottom bumpstop from the 0 design of the suspension
PACKER_RANGE=0.110 ; Total suspension movement range, before hitting packers
DAMP_BUMP=2517.9 ; Damper wheel rate stiffness in N sec/m in slow speed compression
DAMP_FAST_BUMP=1510.7 ; Damper wheel rate stiffness in N sec/m in fast speed compression
DAMP_FAST_BUMPTHRESHOLD=0.080 ; Damper bump slow/fast threshold in seconds
DAMP_REBOUND=4087.5 ; Damper wheel rate stiffness in N sec/m in slow speed rebound
DAMP_FAST_REBOUND=2656.9 ; Damper wheel rate stiffness in N sec/m in fast speed rebound
DAMP_FAST_REBOUNDTHRESHOLD=0.110