Mounting Stream Deck XL to 8020?

[BluePotato00]

Has anybody mounted a Stream Deck XL (for use as a button box) to an 8020 rig? What did you use? I'm not finding any suitable mounts online and the "mounts" I see on Thingiverse are all just tabletop stands, not mounts.

I don't need anything adjustable. It can be a hard mount and probably should be since my rig has motion.

Thanks for any guidance!

 

[Cyberbug]

I used simlabs 8020 button box brackets and drilled the back of the streamdeck xl, its hollow plastic.
you can use any brackets that work for you.

 

[Cyberbug]

 

[GEO147]

Cyber your setup looks really tidy. Would love to see more detail on what you have mounted and how you did it. I've a P1

 

[Cyberbug]

Cyber your setup looks really tidy. Would love to see more detail on what you have mounted and how you did it. I've a P1

you can follow me on instagram and check out all the detailed pictures there, in the bio there is a link to my youtube videos as well for ongoing stuff

@9912carrerat for instagram

 

[BluePotato00]

I used simlabs 8020 button box brackets and drilled the back of the streamdeck xl, its hollow plastic.
you can use any brackets that work for you.

Thanks for the reply. If a photo of the underside of your Stream Deck mounted to your rig is possible, I'd appreciate seeing it!

 

[Cyberbug]

Sorry for the delay been busy. Here ya go. Tried to give you every angle.

 

[BluePotato00]

Thanks! I had (mistakenly) gathered from your earlier post that you had drilled directly into the Stream Deck (thus my confusion)! I now see that you drilled into the magnetic mount. Smart solution.

 

[Cyberbug]

Thanks! I had (mistakenly) gathered from your earlier post that you had drilled directly into the Stream Deck (thus my confusion)! I now see that you drilled into the magnetic mount. Smart solution.

yeah Easy to disconnect and remove

 

[niko911]

Looks nice! Thinking of doing the same, but I use a motion rig and I´m not sure if the magnets are strong enough.
Haven´t find any good 3D print files for the Stream Deck XL either.

 

[BluePotato00]

Looks nice! Thinking of doing the same, but I use a motion rig and I´m not sure if the magnets are strong enough.
Haven´t find any good 3D print files for the Stream Deck XL either.

Maybe a few dabs of glue between the Stream Deck and the magnetic mount would keep it in place.

 

[Cyberbug]

Looks nice! Thinking of doing the same, but I use a motion rig and I´m not sure if the magnets are strong enough.
Haven´t find any good 3D print files for the Stream Deck XL either.

i am installing D-Box this very moment, you can see in the pictures above.

 

[Alfonsspeed]

Bumping this thread Just got the Stream Deck XL last week. Tried with double sticky tape first but it only lasted a couple of days. I am also looking for a 3D print for a mount to use it on my Sim-Lab rig. Did anyone find one? I have been searching on the internet but no luck. At second the way Cyberbug did is also a clever solution.

 

[PolyGone]

Treq offers a Stream Deck XL mount.
Don't own one myself so don't know whether it works well or not.

Stream Deck Mount - TREQ - Sim Racing Equipment

A simple mount designed to hold the Elgato Stream Deck XL. Ideal if you want to use this as a modern day button box.

www.treq-sim.com

 

[Alfonsspeed]

Treq offers a Stream Deck XL mount.
Don't own one myself so don't know whether it works well or not.

Stream Deck Mount - TREQ - Sim Racing Equipment

A simple mount designed to hold the Elgato Stream Deck XL. Ideal if you want to use this as a modern day button box.

www.treq-sim.com

Thanks - saw it this morning too after a tip from my brother. I started to order one (only 29 EUR jippie) but then I came to the shipping costs and the cheapiest was 56 EUR... So I have decided to try to manufacture one myself. Either out of magnetic steel or polycarbonate-plastic which is possible to form.