I'm planning to buy the plans for OSR's super Sport triple monitor stand https://opensimracing.com/collections/monitor-stand-plans/products/heavy-duty-monitor-wood-plans
And also their Indy/F1 rig
I have sent a few Facebook messages and an email over the last couple of weeks and haven't had a response. This makes me a little hesitant to purchase given that it is mentioned the plans are sent manually.
The main thing I want to know is if using 17mm plywood would work with the monitor stand and how much would I need. I'd really like a photo or two of one that someone has built as well, or at least some assurances from someone that it's been built and works well.
I'll have access to a large CNC router soon so I can have everything cut for me for free. If anyone can recommend a different rig over the one I've chosen, I'm interested to hear others thoughts.
And also their Indy/F1 rig
Plans - OSR F1/Indy Seat - Wood
Typical costing One sheet 4' * 8' *3/4" MDF, (120cm * 240cm * 19mm) Approx $25cdn MDF. The nested area of all the sheet parts is 74" * 36". (188cm * 91cm) 2" * 3" construction pine, 20 ft Approx $12CDN Bolts & Screws About We used the ergonomic layout of a real F1 car to produce an authentic...
opensimracing.com
I have sent a few Facebook messages and an email over the last couple of weeks and haven't had a response. This makes me a little hesitant to purchase given that it is mentioned the plans are sent manually.
The main thing I want to know is if using 17mm plywood would work with the monitor stand and how much would I need. I'd really like a photo or two of one that someone has built as well, or at least some assurances from someone that it's been built and works well.
I'll have access to a large CNC router soon so I can have everything cut for me for free. If anyone can recommend a different rig over the one I've chosen, I'm interested to hear others thoughts.
![Luca [OT]](/data/avatars/s/3235/3235113.jpg?1697196734){kind=avatar}