Mike Murphy
Premium
I would really appreciate any suggestions or advice from others who have done this...
I only race in VR but simrig is away from the PC with HDMI (for VR) and USB3.0 type A cable ran behind walls/under floor, so wanted to use a basic 16" 'portable' 1080p USB3.0 monitor with VESA 75 mounting holes (only £70 new
) to mirror/extend desktop.
I have P1-X with front-mount wheel bracket.
Already have keyboard tray and button box mount attached.
I could re-purpose the button box mount for the screen and do something else with the button box (might be best solution).
My other thought was a RAM mount for the screen (or button box) with either a clamp mount to the wheel bracket or attach it to one of the uprights (not much profile available above the wheel bracket though).
Appreciate any help offered
I only race in VR but simrig is away from the PC with HDMI (for VR) and USB3.0 type A cable ran behind walls/under floor, so wanted to use a basic 16" 'portable' 1080p USB3.0 monitor with VESA 75 mounting holes (only £70 new
) to mirror/extend desktop.I have P1-X with front-mount wheel bracket.
Already have keyboard tray and button box mount attached.
I could re-purpose the button box mount for the screen and do something else with the button box (might be best solution).
My other thought was a RAM mount for the screen (or button box) with either a clamp mount to the wheel bracket or attach it to one of the uprights (not much profile available above the wheel bracket though).
Appreciate any help offered
![Luca [OT]](/data/avatars/s/3235/3235113.jpg?1697196734){kind=avatar}
