TED Tarlac Circuit Hill

Tracks TED Tarlac Circuit Hill v1.2

Login or Register an account to download this content
Teddie submitted a new resource:

TED Tarlac Circuit Hill - Based on the real-life Tarlac Circuit Hill race track in the Philippines.

Tarlac Circuit Hill (TCH) is a 1.500 km permanent circuit located within the Tarlac Recreational Park in San Jose, Tarlac, Philippines and is approximately 142 km away from Manila. The full course has 15 turns and runs in a clockwise direction. It was built as an initiative of the Tarlac City Government and Governor Victor Yap. 2003 Asian Formula 3 champion Pepon Marave designed the circuit and acts as its Technical Consultant. Meanwhile, former Philippine Karter of the Year Richard Joson is...

Read more about this resource...
 
Teddie updated TED Tarlac Circuit Hill with a new update entry:

Tarlac Circuit Hill v0.98 Update

Tarlac Circuit Hill v0.98 Update

This track is an original creation by Teddie Tapawan and is based on the real-life Tarlac Circuit Hill race track in the Philippines.

Additional Credits and Thanks:
* Shared X-Packs by Tyrone and Gutbomb
* Grass textures by Mike08
* Multiple reference photos provided by members of the Assetto Corsa Philippines on Facebook

(Please do not copy or modify without author's permission. Contact teddabod@funrealtournament to report bugs or to request track changes...

Read the rest of this update entry...
 
Teddie updated TED Tarlac Circuit Hill with a new update entry:

Tarlac Circuit Hill v1.0 Update

Tarlac Circuit Hill v1.0 UPDATE (09-26-2020)
=========================
* Added higher kerb physics mesh on certain turns on west side as in real life
* Fix road rise/height issue near start/finish (s/f) gantry bypass road
* Fix high points on some parts of terrain near marshal tent and other areas
* New trees added, some old ones removed/replaced
* New skin for a greener Tarlac
* Replace bullhorn/pole with proper light/pole
* Added missing buildings
* Added fishball carts and...

Read the rest of this update entry...
 
Not going to post a review just yet, since I had a blast learning the track on v0.98, but there are invisible bumps on the kerbs on some of the first corners with the v1.0.

 
Last edited:
Teddie updated TED Tarlac Circuit Hill with a new update entry:

Tarlac Circuit Hill v1.1 UPDATE

Tarlac Circuit Hill v1.0 & v1.1 UPDATE (09-26-2020)
=========================
* Removed higher kerbs due to graphics issue (reverted kerb item below)
* Added higher kerb physics mesh on certain turns on west side as in real life
* Fix road rise/height issue near start/finish (s/f) gantry bypass road
* Fix high points on some parts of terrain near marshal tent and other areas
* New trees added, some old ones removed/replaced
* New skin for a greener Tarlac
* Replace bullhorn/pole with...

Read the rest of this update entry...
 
Teddie updated TED Tarlac Circuit Hill with a new update entry:

Tarlac Circuit Hill v1.1b UPDATE

Tarlac Circuit Hill v1.0 & v1.1b UPDATE (09-26-2020)
===========================================
* Fix for incorrect kn5 file in last update
* Removed higher kerbs due to graphics issue (reverted kerb item below)
* Added higher kerb physics mesh on certain turns on west side as in real life
* Fix road rise/height issue near start/finish (s/f) gantry bypass road
* Fix high points on some parts of terrain near marshal tent and other areas
* New trees added, some old ones...

Read the rest of this update entry...
 
Hope the higher kerbs would come back!
2.JPG
 
Last edited:
Teddie updated TED Tarlac Circuit Hill with a new update entry:

Tarlac Circuit Hill v1.2 UPDATE

Tarlac Circuit Hill v1.2 UPDATE (10-15-2020)
=====================================
* Fix trees using incorrect shaders, causing them to be over-bright with sun behind
* Make the Greener Grass skin have even much more grass and green, much less dirt
* Added paintlines on track for start/finish
* Fix alignment of start gantry and lights models
* Updated VAO patch

Tarlac Circuit Hill v1.0 & v1.1b UPDATE (09-26-2020)
===========================================
* Fix for incorrect kn5...

Read the rest of this update entry...
 
Back
Top