Finally, after months of study and work .... the mod is ready
to the contrary of the previous mod no longer has the original electronics but is only entrusted to the pcb of the display where the keys are connected push button (nkk 2011) and keys toggle switch (front and side), rotary-encoder, rotary switch and clutch, change has the original blades with reinforced springs and buttons knitter,
the front end has been completely rebuilt with plastic and putty to recreate the famous step below the encoder housing and GRP Boat for display as cutting the plastic thrustmaster you can not fit it as reality, was mounted a quick release formula (sparco ) ahh i forgot manettini were made by me on two layers of rubber and covered with spray and coiled cord 5mm
to the contrary of the previous mod no longer has the original electronics but is only entrusted to the pcb of the display where the keys are connected push button (nkk 2011) and keys toggle switch (front and side), rotary-encoder, rotary switch and clutch, change has the original blades with reinforced springs and buttons knitter,
the front end has been completely rebuilt with plastic and putty to recreate the famous step below the encoder housing and GRP Boat for display as cutting the plastic thrustmaster you can not fit it as reality, was mounted a quick release formula (sparco ) ahh i forgot manettini were made by me on two layers of rubber and covered with spray and coiled cord 5mm