Fanatec Universal Hub + OMP WRC wheel
- Thread starter 9XI
- Start date
Didn't see your thread, thanks for answering it yourself after trying 
To give a more technical answer:
The fanatec hubs have a 6x70mm bolt pattern, which is what most standard wheels have.
Some only use 3 of the bolts and some special wheels other patterns.
Most of the non-standard patterns come from manufacturers of simracing equipment. Like my cheap Moza ES wheel, which has a 55mm bolt pattern iirc and also a 6x55mm quick release.
The more expensive Moza wheels like the CS wheel have the normal 6x70mm though so you can swap the rim on the CS for other rims
To give a more technical answer:
The fanatec hubs have a 6x70mm bolt pattern, which is what most standard wheels have.
Some only use 3 of the bolts and some special wheels other patterns.
Most of the non-standard patterns come from manufacturers of simracing equipment. Like my cheap Moza ES wheel, which has a 55mm bolt pattern iirc and also a 6x55mm quick release.
The more expensive Moza wheels like the CS wheel have the normal 6x70mm though so you can swap the rim on the CS for other rims
Thanks for your input; I didn't know that. I wanted to match the diameter of my real wheel in a car so I was looking at 350-360 mm wheels with 6x70 mm pattern.
Along with that I had to turn around pad holders to adjust the position of the shifting pads, and now it's just the way I wanted.
Along with that I had to turn around pad holders to adjust the position of the shifting pads, and now it's just the way I wanted.
Last edited:
